Samsung LN32C450E1DXZA - Manuel (Page 17)

17
English
03
Basic Featur
es
speaker select
(External speaker / TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External speaker.
When ✎
speaker select is set to External speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
When
✎ speaker select is set to External speaker, you
should use these settings.
TV speaker: Off, External speaker: On x
When
✎
speaker select is set to TV speaker, you
should use these settings.
TV speaker: On, External speaker: On x
If there is no video signal, both speakers will be mute.
✎
sPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Audio Format: ■ During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a dolby
✎
digital setup, maximize your interactive 3D sound
experience.
Audio Delay ■ : Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
sound Reset
Reset all sound settings to the factory defaults.
Setup Menu
setting the Time ¦
MEnU
O
m → setup → Time → EnTER E
Time
The current time will appear every time you press the ✎
InFO button.
Clock ■ : Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set ✎
the clock again.
Clock Mode: Set up the current time manually or
automatically.
Auto – : Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
✎
the time automatically.
Manual – : Set the current time manually.
Depending on the broadcast station and signal, ✎
the auto time set up may not be correct. In this
case, set the time manually.
Clock set: Set the Month, Day, Year, hour, Minute
and am/pm.
Available only when
✎
Clock Mode is set to
Manual.
You can set the month, day, year, hour and minute
✎
directly by pressing the number buttons on the
remote control.
DsT (Off / On): Switches the DST(Daylight Saving Time)
function on or off.
This function is only available when the ✎
Clock
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the ✎ Clock
Mode is set to Auto.
Using the sleep Timer ¦
MEnU
O
m → setup → Time → sleep Timer →
EnTER E
sleep Timer ■
t : Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
To cancel the ✎
sleep Timer, select
Off.
setting the On/Off Time ¦
MEnU
O
m → setup → Time → Timer 1 →
EnTER E
Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off
timer settings can be made. You must set the clock first.
MEDIA.P
P
POWER
P.MODE S.MODE SLEEP
Timer 1
L Move U Adjust E Enter R Return
On Time
Off Time
Volume Source Antenna Channel
Repeat
Sun Mon Tue Wed Thu Fri Sat
Inactivate 12 00 am
Inactivate 12 00 am
10 TV Air 3
Once
▲
▼
BN68-02663B_Eng.indb 17 2010-09-01 �� 9:20:24