Samsung LN32C450E1DXZA - Manuel (Page 15)

15
English
03
Basic Featur
es
Picture Options
MEnU
O
m → Picture → Picture Options →
EnTER E
In
✎
PC mode, you can only make changes to the Color
Tone, size and Auto Protection Time.
Color Tone (Cool / normal / Warm1 / Warm2) ■
Warm1 ✎ or Warm2 will be deactivated when the
picture mode is Dynamic.
Settings can be adjusted and stored for each
✎
external device connected to an input on the TV.
size ■ : Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
✎
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
nOTE
✎
After selecting x Zoom1, Zoom2 or Wide Fit:
1. Press the ► button to select Position.
2. Press the EnTER E button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the EnTER E button.
5. Press the ► button to select Reset.
6. Press the EnTER E button to reset the picture
to its default position.
After selecting x screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the
◄ or ► button to select Position.
2. Press the EnTER E button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
4. Press the EnTER E button.
5. Press the ◄ or ► button to select Reset.
6. Press the EnTER E button.
HD (High Definition): 16:9 - 1080i/1080p (1920x1080), x
720p (1280x720)
Settings can be adjusted and stored for each
x
external device you have connected to an input on
the TV.
Input source Picture size
ATV, AV,
Component (480i, 480p) 16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p) 16:9, 4:3, Wide Fit,
screen Fit
PC 16:9, 4:3
Digital noise ■ Filter (Off / low / Medium / high / Auto
/ Auto Visualization): If the broadcast signal received by
your TV is weak, you can activate the Digital noise Filter
feature to reduce any static and ghosting that may appear
on the screen.
When the signal is weak, try other options until the
✎
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
Only available for analog channels.
✎
When bar is green, you are receiving the best
✎
possible signal.
MPEg noise Filter (Off / low / Medium / high / ■
Auto): Reduces MPEG noise to provide an improved
picture quality.
Disabled under
✎
PC mode.
hDMI Black level (normal / low) ■ : Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode. ✎
MEDIA.P
P
POWER
P.MODE S.MODE SLEEP
Picture Options
Color Tone : Normal ►
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Auto Protection Time : 2 hours
U Move E Enter R Return
BN68-02663B_Eng.indb 15 2010-09-01 �� 9:20:23