Samlex America SCC-30AB - Manuel (Page 36)

36
5
ConstruCtion, layout & Controls
automatically set once a particular battery type corresponding to one of the 8 options has
been programmed using DIP Switches 2,3,4 (See page 43, Table 6.1).
SCREEN 7: Displays the heat sink temperature (Heatsink) in °C (the metal plate of the front
panel acts as the heat sink). It also displays the temperature of the battery in °C when the
optional Battery Temperature Sensor (BTS) Model No. DC-BTS-A-C is used.
NOTE: The battery temperature can not be displayed below 0°C. If the battery
temperature falls below 0°C, the display will read “- - - °C”.
Amp Watts BatV
0.0 0.0 12.0
Amp-Hours
0 Ah
Total Amp-Hours
0 Ah
Mode: Charger
State: Bulk or Absorption or
Float or Equalization
Bulk* Float
14.0V 13.4V
EQU EQU-T CYCLE
14.2V 1hr 28day
Heatsink BTS
25oC 25oC
PUSH: Display Select
PUSH: Display Select
PUSH: Display Select
PUSH: Display Select
PUSH: Display Select
PUSH: Display Select
PUSH: Display Select
Display Screens (1, Fig 5.1)
Screen 1
Screen 2
Screen 3
Screen 4
Screen 5
Screen 6
Screen 7
* Note: Displayed as “Bulk”.
Actually, it is “Absorption”.
Fig. 5.3. LCD Display Flow