For direct-wired dryers, Disconnect power, Disconnect wiring – Amana W10232964A Manuel d'utilisation

Page 7: Make sure leveling legs are secure in dryer base, Use masking tape to secure dryer door, Moving care - gas dryers, Unplug the power supply cord, Close shutoff valve in gas supply line, Cap the open fuel supply line, Changing the drum light

Advertising
background image

7

For direct-wired dryers:

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1. Disconnect power.

2. Disconnect wiring.

3. Make sure leveling legs are secure in dryer base.

4. Use masking tape to secure dryer door.

Moving care - Gas Dryers

1. Unplug the power supply cord.

2. Close shutoff valve in gas supply line.

3. Disconnect gas supply line pipe and remove fittings attached

to dryer pipe.

4. Cap the open fuel supply line.

5. Make sure leveling legs are secure in dryer base.

6. Use masking tape to secure dryer door.

Changing the Drum Light

1. Unplug dryer or disconnect power.
2. Open the dryer door. Locate the light bulb cover on the back

wall of the dryer. Remove the screw located in the lower right-
hand corner of the cover. Remove the cover.

3. Turn bulb counterclockwise. Replace the bulb with a 10-watt

appliance bulb only. Replace the cover and secure with the
screw.

4. Plug in dryer or reconnect power.

Advertising