LG LRG3093ST - Manuel (Page 22)

22
OPERATING INSTRUCTIONS
HOW TO SET PREHEATING ALARM LIGHT
ON/OFF
The interior oven light automatically turn on when the
oven door is opened.
When oven reaches set-temperature after preheat,
the oven notifies preheat-end by flashing oven lamp
until the door is opened.
You can activate or deactivate the smart oven light
feature. Default Setting is on.
ᕡ Press and hold the “WARM” pad for 3
seconds. Then press the “WARM” pad
once and “PrE” will display.
ᕢ Press the number 1 to switch between
ON and OFF.
ᕣ Press the “START” pad to accept the
change.
HOW TO ADJUST BEEPER VOLUME
The beeper volume feature allows you to adjust the
volumes to a more acceptable volume. There are four
possible volume levels, Hi, Med, Lo and Off.
ᕡ Press and hold the “WARM” pad for 3
seconds. Then press the “WARM” pad
twice and “BEEP” will display.
ᕢ Press the number 1 Key pad to toggle
between the various beeper volumes.
ᕣ Press the “START” pad to accept the
change.
NOTE:
When the display reads:
Hi or 3 = Highest volume
-- or 2 = Normal volume
Lo or 1 = Lowest volume
Off = Mute
HOW TO SELECT FAHRENHEIT OR CELSIUS
TEMPERATURE
Your oven control is set to use the Fahrenheit
temperature selections but you may change this to
use the Celsius selections.
ᕡ Press and hold the “WARM” pad for 3
seconds. Then press the “WARM” pad
3 times and “Unit” will display.
ᕢ Press the number 1 to switch between
the F and C.
ᕣ Press the “START” pad to accept the
change.
SPECIAL FEATURES OF YOUR OVEN CONTROL