Technical data – Electrolux EWP1272TDW Manuel d'utilisation

Page 20

Advertising
background image

Problem

Possible solution

Make sure that the drain hose have no damages.

Make sure you use the correct detergent and the correct
quantity of it.

You cannot open the
appliance door.

Make sure that the washing programme is finished.

Set the drain or the spin programme if there is water in
the drum.

The appliance makes
an unusual noise.

Make sure the levelling of the appliance is correct. Refer
to 'Installation Instruction'.

Make sure that the packaging and/or the transit bolts are
removed. Refer to 'Installation Instruction'.

Add more laundry in the drum. The load may be too
small.

The appliance fills with
water and drain imme-
diately.

Make sure that the drain hose is in the correct position.
The hose may be too low.

The washing results
are not satisfactory.

Increase the detergent quantity or use a different deter-
gent.

Use special products to remove the stubborn stains be-
fore you wash the laundry.

Make sure that you set the correct temperature.

Decrease the laundry load.

After the check, activate the appliance.
The programme continues from the point
of interruption.

If the problem occurs again, contact the
Service.

13. TECHNICAL DATA

Dimensions

Width / Height / Depth

600 / 850 / 500 mm

Total depth

542 mm

Electrical connection:

Voltage
Overall power
Fuse
Frequency

230 V

2100 W

10 A

50 Hz

Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture

IPX4

Water supply pressure

Minimum

0,5 bar (0,05 MPa)

Maximum

8 bar (0,8 MPa)

20 www.electrolux.com

Advertising