5 starting a programme with the delay start, 7 cancelling a programme, 8 opening the door – Electrolux EWP1272TDW Manuel d'utilisation

Page 13: 9 at the end of the programme

Advertising
background image

9.5 Starting a programme with
the delay start

• Press

to set the delay you want to

set. The indicator of the set delay is on.
The indicator

is on.

• Press

:

– The appliance starts the countdown.
– When the countdown is completed,

the programme starts automatically.

You can cancel or change the set
of the delay start before you press
the

.

To cancel the delay start:

1.

Press

to set the appliance to

pause.

2.

Press

until the indicator of the set

delay goes off.
Press

again to start the pro-

gramme immediately.

9.6 Interrupting a programme
and changing the options

You can change only some options be-
fore they operate.

1.

Press

. The indicator flashes.

2.

Change the options.

3.

Press

again. The programme con-

tinues.

9.7 Cancelling a programme

1.

Turn the programme knob to

to

cancel the programme and to deacti-
vate the appliance.

2.

Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.

The appliance does not drain the
water.

9.8 Opening the door

While a programme or the delay start op-
erates, the appliance door is locked and
the indicator

is on.

CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the door.

Open the appliance door when the
delay start operates:

1.

Press the

to pause the appliance.

2.

Wait until the door lock indicator
goes off.

3.

You can open the door.

4.

Close the door and press the
again. The delay start continues to
operate.

Open the appliance door when the
programme operates:

1.

Turn the programme knob to

to

deactivate the appliance.

2.

Wait for some minutes and then open
the appliance door.

3.

Close the appliance door.

4.

Set the programme again.

9.9 At the end of the
programme

• The appliance stops automatically.
• The acoustic signal operates (if it is acti-

vated).

• The indicator

goes off.

• The door lock indicator

goes off.

• The indicator

is on.

• You can open the door.
• Remove the laundry from the appliance.

Make sure that the drum is empty.

• Keep the door ajar, to prevent the mil-

dew and odours.

• Close the water tap.
• Turn the programme knob to

to de-

activate the appliance.

The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent the

creases in the laundry.

– The door lock indicator

is on. The

indicator

flashes. The door stays

locked.

– You must drain the water to open the

door.

To drain the water:

1.

If necessary, decrease the spin
speed. If you set

, the appliance

only drains.

ENGLISH

13

Advertising