Bosch HDI8054U - Manuel (Page 11)

English 8
• the cap will click from side to side as the prongs hit the
groove ridge .
Burner Grates
Grates must be properly positioned before cooking.
For replacement rubber feet: Part # 416438, contact your
dealer or call the service number listed inside the cover.
Control Knobs
The cooktop has one control knob for each burner. Push
down and turn to the left to light and set the desired heat
setting.
Figure 1: Burner Cap Placement
Correct Burner Cap Placement Incorrect Burner Cap Placement
9 WARNING
To prevent flare-ups, properly support pots, and
avoid spills, all grates must be properly positioned
on the cooktop whenever the cooktop is in use.
Each of the four feet must be placed into the
corresponding dimples in the cooktop. Do not use a
grate if the rubber feet are missing or damaged.