Cleaning and maintenance, Cleaning, Self clean – Bosch HBL5651UC Manuel d'utilisation

Page 20

Advertising
background image

English 18

Cleaning and Maintenance

Cleaning

Self Clean

During Self Clean, the oven is heated to a very high
temperature. Soil is burned off at this temperature.

NOTICE:

Wipe out excessive spillage before Self Cleaning the oven.

NOTICE:

Do not clean parts or accessories in the Self Clean oven.
Remove baking dishes and oven racks from the oven.

Single Ovens

To set the Self Clean mode:

1. Remove all accessories and racks from the oven.
2. Self Clean will not run if a timer is active. Clear all

running timers before attempting to start Self Clean.

3. Turn the Cooking Mode Dial to Self Clean.
4. Turn the Temperature Settings Dial to Self Clean.
5. After 3 seconds, the display blinks “--:--”.
6. Press the + or - key. The display shows the default Self

Clean time, “3:00” hours. Press the + or - key to
increase or decrease the Self Clean time. The
maximum is 4 hours and the minimum is 2 hours.

7. When the time in the display is unchanged for 3

seconds, Self Clean begins. The Self Clean LED is
illuminated.
The oven door is automatically locked during Self
Clean.

8. When the Self Clean display shows “0:00”, Self Clean

ends.

9. Wipe remaining ash from the oven using a moist cloth.
10. To cancel Self Clean, turn the Cooking Mode Dial to

"Off".

Note:

The oven light cannot be turned on during Self
Cleaning.

The special heat-resistant enamel and the polished
components in the oven can become discolored over
time. This is normal and does not affect operation. Do
not use scouring pads or abrasive cleaners to treat
discolorations.

Double Ovens

Only one oven cavity can run the Self Clean mode at a
given time.

To set the Self Clean mode:

1. Remove all accessories and racks from the oven.
2. Self Clean will not run if a timer is active. Clear all

running timers before attempting to start Self Clean.

3. Turn the Cooking Mode Dial for the selected oven

cavity (upper or lower) to Self Clean.

4. After 3 seconds, the display blinks “--:--”.
5. Press the + or - key. The display shows the default Self

Clean time, “3:00” hours. Press the + or - key to
increase or decrease the Self Clean time. The
maximum is 4 hours and the minimum is 2 hours.

6. When the time in the display is unchanged for 3

seconds, Self Clean begins. The Self Clean LED for
the cavity is illuminated.

9 WARNING

Children should not be left alone or unattended in an
area where appliances are in use. During the Self
Clean cycle, parts of the appliance may become
potentially harmful to persons who lack adult
knowledge of appliances and adult reactions to
potentially harmful conditions.
During the elimination of soil during Self Cleaning,
small amounts of carbon monoxide can be created.
Fiberglass insulation could give off very small
amounts of formaldehyde during the first several
cleansing cycles. To minimize exposure to these
substances, provide good ventilation with an open
window, or use a ventilation fan or hood.

Advertising
Ce manuel est liée aux produits suivants: