Table 4 table 5, Safety disconnection, Heat-up function (automatic cooking start) – Teka TM 620 Manuel d'utilisation

Page 26

Advertising
background image

GB

26

locking function will be reactivated and will
reappear the next time the touch control is
activated.

Cancelling the locking function

Locking can be permanently deactivated
by touching sensor

(4) for 5 seconds

immediately after activating the touch con-
trol. This should be done within 5 seconds
after activating the touch control with the
on/off sensor

(1), and the locking func-

tion will be cancelled and the control dis-
connected. If this is not done properly, the
touch control will remain locked and will
switch off after 20 seconds.

The locking has been deactivated. When
the sensor is reactivated with the on/off
sensor

(1), the hob will be ready to be

used for cooking.

Safety disconnection

If one or more hotplates have, in error, not
been switched off, the unit automatically
disconnects after a certain length of time
(see table 4).

When this safety disconnection has taken
place, a

0

appears if the temperature on

the surface of the glass is dangerous to
the user, or a

H

appears if there is, indeed,

a risk of burning.

To use the appliance again, use the on / off
sensor

(1) to switch it off, and then

switch it back on again.

Heat-up function

(Automatic cooking start)

This feature enables you to set the start
time for cooking. The touch control pre-
programs the selected hotplate to full
power and then decreases it to the power
you have chosen after a certain length of
time (see table 5).

SWITCHING HEAT-UP FUNCTION ON

1 The hotplate must have already been se-

lected. The corresponding decimal point
must be lit (13).

2 Select power

9

and then touch sensor

. The power light will flash on and off,
alternating between

9

and

A

; now use

sensor

to lower it to the constant co-

oking level you want - 6, for example.
The indicator light flashes alternately
between

6

and

A

.

e.g.:

You want to cook at power level

6

and

begin with rapid heating. Select power

9

,

touch sensor

again and the power in-

6
5
4

1,5

1 and 2
3 and 4

5

6, 7, 8 and 9

Maximum Operating

Time (In hours)

Power

Selected

Table 4

Table 5

1
3

4,8
6,5
8,5
2,5
3,5
4,5

---

Power

Selected

Start Automatic Cooking

Feature (Time in mins.)

1
2
3
4
5
6
7
8
9

Advertising