Nilfisk-ALTO C.A.V. 15 - Manuel (Page 7)

Page -7-
Clarke ® American Sanders C.A.V. 15 Operator's Manual
HOW TO ASSEMBLE THE MACHINE
CAUTION!
On delivery, the accessories - are lying in the tank and
must be removed before the machine is used for the first
time. See figure 2.
To assemble the machine, remove the machine top
section:
The power cord must not yet be inserted into a plug
socket.
1. Open the retaining clamps and lift off the machine top
section (Figure 3).
2. Place a bag-type filter into the tank as described in the
instructions printed on the filter.
3. Fit the machine top section back on the tank, and close
the retaining clamps.
4. Connect the suction hose. The "Wap Multifit" enables
any Wap Technology suction hoses (27, 32, 36, 50 mm
diameter) to be connected to the machine (Figure 4).
Figure 2
Figure 3
MACHINE OPERATION
Picking Up Dry Substances
Before picking up dry substances, the bag-type filter
should always be installed in the tank. It is then easy to
dispose of the material picked up and the service life of
the main filter element is significantly increased. Dry
cleaning without bag-type filter is also possible.
WARNING: Inflammable substances must not be
picked up with the machine!
After picking up liquids, the filter element is damp. Damp
filter elements can clog more quickly when dry substances
are picked up. For this reason, the filter element should
be dried or replaced before picking up any dry sub-
stances.
Picking Up Liquids
Before picking up liquids, the bag-type filter must always
be removed from the tank.
WARNING: Inflammable liquids must not be picked
up with the machine!
If foaming is observed, stop work immediately and empty
the tank.
Switching On The Machine (C.A.V 15)
Turn the switch to position "I" (Figure 3).