Nilfisk-ALTO C.A.V. 15 - Manuel (Page 30)

Page -14 - Clarke ® American Sanders Operator's Manual - Sander 1600DC
12 grit For removing gross imperfections and restore evenness
16 grit to old flooring. To remove build-up of paints and varnishes.
20 grit
24 grit
30 grit For first sanding of new flooring (maple, oak). For removing
36 grit minor imperfections and finishes from old flooring.
50 grit For first sanding of new flooring (cedar, pine, fir)
For clean-up of 16 grit.
60 grit
For clean-up from initial cut 36 grit.
60 grit
screen mesh
80 grit
For final sanding of certain hardwoods. For clean-up
80 grit of initial cuts (50 grit).
screen mesh
100 grit
For final sanding of certain hardwoods and conifers where
100 grit a smooth surface is desired.
screen mesh
120 grit For final sanding of certain hardwoods and conifers where
screen mesh a smooth surface is desired. For leveling after initial finish
coat.
150 grit For scratching surface between coats of finish.
screen mesh
180 grit For fine scratching of surface before final coat of finish.
screen mesh
Grain Use
Standard Grade
Part #/Qty
945342/25
945343/25
945344/25
945347/50
945349/50
945350/50
945351/50
945352/50
Professional Grade
Part #/Qty
945566/25
945567/25
945568/25
945569/50
945570/50
945571/50
945573/50
945574/50
945722/20
945575/50
945723/20
945576/50
945724/20
945725/20
945726/20
945727/20
HOW TO PREPARE THE MACHINE FOR OPERATION (cont.)