MAX GS732C - Manuel (Page 21)

21
4 At this point, the jammed pin should fall out. If the jammed
pin does not fall out, carefully remove the pin taking care not
to damage the Nosepiece.
After you have removed the jammed pin, take the following
steps to assemble the Magazine into the tool.
5 Insert the front of the Magazine into the Magazine Guide
(Nose).
6 Make sure to align the Magazine with the Magazine Holder
with no gap.
Push the Remove Lever until it clicks.
Magazine Guide (Nose)
GS738C_USA.book 21 ページ ２０１１年８月２４日 水曜日 午後５時０分