MAX GS732C - Manuel (Page 20)

20
7. PRODUCTION YEAR INDICATION
This product indicates production number at the lower part
of the grip. The first 2 digits of the number from left indicates
the product year.
8. STORING
1 When not in use for an extended period, apply a thin coat of
the lubricant to the steel parts to avoid rust.
2 Do not store the tool in a cold weather environment. Keep
the tool in a warm area.
3 When not in use, the tool should be stored in a warm and
dry place. Keep out of reach of children.
4 All quality tools will eventually require servicing or replace-
ment of parts because of wear from normal use.
SLEEP-MODE
To save battery life this tool is equipped with Sleep-Mode function.
If the battery is left in the tool for more than 24 hours, the tool will
go into"Sleep-Mode" (the tool will not function.)
To restart the tool remove then reinstall the battery. This will allow
the tool to function normally.
9. TROUBLE SHOOTING/REPAIRS
1 The repairs shall be carried out only by the MAX CO., LTD.
authorized service center.
2 The tool is provided with a pin remover to ensure that the
jamming pins can be easily removed.
• Remove the Fuel Cell, followed by the Battery.
Procedure
1 Remove the Fuel Cell, followed by the Battery.
2 Remove the pins remaining in the magazine.
3 Pull up the Remove Lever and remove the Magazine from
the tool.
(Example)
0 9 8 2 2 6 0 3 5 D
Year 2009
WARNING
Remove Lever
GS738C_USA.book 20 ページ ２０１１年８月２４日 水曜日 午後５時０分