Kolpin 85210 – Can Am Rear Suspension Lock Out - Manuel (Page 3)

Rev. 1
7. Bolt the Lock Out Rod into the Top Bracket, using the provided bolt and nut. Tighten
Securely. Be sure on the Left side of the machine you are above the brake line.
8. Now, swivel the Lock Out Rod to meet the Bottom Bracket on the shock. Using the pin lock
provided, pin the Lock Out Rod to the Bottom Bracket. Tighten the Bottom Bracket Securely
after pinning.
9. Repeat for opposite side.
Kolpin Lock Out Uses:
• The Kolpin Can Am Lock out should be used for the following applications:
1. Kolpin DirtWorks
2. Pulling ice shanties, trailers, boats, etc.
3. Heavy duty trailering applications
• For trail riding remove the Lock Out Rod and you have your full suspension back.
Kolpin Lock Out Compatible With:
• Can Am Outlander
• Can Am Outlander Max
• Can Am Renegade
Kolpin Powersports, Inc.
205 N. Depot St.
PO Box 107
Fox Lake, WI 53963
[email protected]
1-877-956-5746