Kolpin 85210 – Can Am Rear Suspension Lock Out - Manuel

Rev. 1
85210 – Can Am Rear Suspension Lock Out
2
Bolt
1
Pin Lock
3
Installation:
1. Lift the rear of your Can Am off of the ground for easier installation.
2. Remove the OEM Bolt from the bottom bracket of the left and right shock.
3. Put the OEM bolt you just removed through the Kolpin Bottom Metal Bracket (smaller of the
two brackets) provided in the kit, and place the bolt back through the shock. Do not fully
tighten yet as you will have to swivel the bracket to meet up with the Top Bracket.
NO. Description QTY.
1 Lock Out Rod 2
2 Top Bracket 2
3 Bottom Bracket 2
4 Pin Lock 2
5 5/16” x 1.50” Hex Head Bolt 2
6 5/16” Nylock Nut 2
Remove this OEM bolt from
the base of the shock.