Draw-Tite 59842 ROOF RACK - Manuel (Page 2)

8. With one strap loosely mated around the door frame,
hold the other side Strap out from the body side and place
into the door frame. (Fig 2c)
E
th bb d th t i l t id
PUSH
PULL
Installation Instructions: KIA Soul 2010 and up
Fig 2c Fig 2d
Ensure the rubber pads on the straps are in place to avoid
paint damage.
9. Using the supplied “L” wrench tighten the bolts to pull
the Straps up towards the door frame. (Fig 2d)
Tip: While tensioning the Straps alternate from side to
side to ensure even tension on both sides.
Make sure the support hooks
mate with the slots on the
Ensure bars are parallel and straps are tightened fully.
Perform a check by tugging on the cross bars. Front of Vehicle
Front of Vehicle
Gasket Pads.
Attaching Covers to End Supports
Should you need to remove your GTX covers the
following describes the replacement and use.
10. Locate the ends of the Hinge with the Cover
hinge holes. Flex the Hinge ends in and push
Fig 3a
Fig 3b
through the Cover holes until the capped ends
engage (you’ll hear and audible click) (Fig 3a & b)
11. To fully extend the Covers away from the
Support (to access the Accessory Channel or
mounting hardware) Pivot the Cover on the Hinge
while pushing down on the top of the Cover (Fig 3c)
Locking Covers and Mounting Accessories
Fig 3c
Locking Covers and Mounting Accessories
12. You are now ready to mount your accessories examples:
Bike, Kayak, luggage carriers by using the global channel if
applicable. “T” bolts are available to mount accessories (Fig 4a)
Be sure to cut your buffer strips to size to completely cover
your channel once the accessories are mounted.
13. Lock all four covers into place using the keys
provided (Fig 4b) . Store your keys in a safe place such
as the glove box or key ring. Replacement locks and
Global
Channel
Access
LOCK
l k d
Fig 4a
Fig 4b
as the glove box or key ring. Replacement locks and
keys are available as service items.
14, Ensure all covers are pushed up hard against the
End Supports (Fig 4 c &d). You’ll hear an audible “click”
when the cover is fully engaged.
General Usage Information
* It is essential for the proper assembly, operation and use of the Roof Rack that the
instructions and safety precautions supplied are strictly observed
locked
Un‐locked
instructions and safety precautions supplied are strictly observed.
* The maximum permissible load for your roof rack is the lower of the maximum load capacity
specified in you owners manual or specified on your roof rack load label. Do NOT exceed the
maximum load capacity.
Maximum load capacity equals the weight of the rack + accessories + weight of cargo.
Ensure your vehicle’s function is not impaired before driving.
Any weight carried on the vehicle will adversely affect its handling particularly in cornering or in a cross wind and the vehicle should
therefore be driven with increased caution
Check the function of all doors and sunroof before driving
CLICK
Fig 4d
Fig 4c
therefore be driven with increased caution. Check the function of all doors and sunroof before driving.
For lost key replacement or other service items call customer service: 1-800-632-3290 or visit:
www.rolaproducts.com
Please have lock core number or part numbers available.
Loads should be evenly distributed and secured. REGULARLY CHECK THE TIGHTNESS OF LOCKING STRAPS
59842N Rel. 6/4/10 Page 2 of 2 Printed in China