Apple Mac mini (Guide de l’utilisateur) - Manuel (Page 113)

113
Information You Need in Australia
All telecommunications devices are required to be
labelled as complying to the Australian
telecommunications standards, ensuring the health and
safety of the operator and the integrity of the Australian
telecommunications network. To provide compliance
with the Australian Communications Authority’s
technical standards, please ensure that the following AT
commands are maintained:
 ATB0 (ITU/CCITT operation)
 AT&G0 (no guard tone)
 AT&P1 (33/66 pulse dial make/break ratio)
 ATS0 = 0 or ATS0 = 1 (no answer or answer greater
than one ring)
 ATS6 = 95
(DTMF period between 70–255 ms)
 ATS11 = 95
(DTMF period between 70–255 ms)
For calls that are automatically generated, a total of
three call attempts are allowed to a telephone number,
with a minimum period between calls of 2 seconds. If
the call does not connect after three attempts, 30
minutes must expire before automatic redialing may be
initiated. Failure to set the modem (and any associated
communications software) to the above settings may
result in the modem being non-compliant with
Australian telecommunications standards. Under these
circumstances a user could be subject to significant
penalties under the Telecommunications Act 1997.
This modem must be properly secured in order for you
to use it. Telecommunications network voltages exist
inside the computer and the telecommunications line
connection must be removed before opening the
computer.
Information You Need in New Zealand
This modem is fully approved to operate on the New
Zealand telecommunications network under Telepermit
number PTC 211/04/002. All telecommunications devices
are required to hold a Telepermit and be labelled
accordingly with the approved Telepermit number to
comply with the New Zealand telecommunications
standards, ensuring the health and safety of the
operator and the integrity of the New Zealand
telecommunications network. To ensure compliance, all
calls that are automatically generated should not make
more than 10 call attempts to the same number within
any 30 minute period with a minimum period between
calls of 30 seconds. Failure to adhere to these standards
may result in the modem being non-compliant with
New Zealand Telecom standards. Under these
circumstances a user could be subject to significant
penalties.
Important: The grant of a Telepermit for any item of
terminal equipment indicates that only Telecom has
accepted that the item complies with minimum
conditions for connection to its network. It indicates no
endorsement of the product by Telecom, nor does it
provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all
respects with another item of Telepermitted equipment
of a different make or model, nor does it imply that any
product is compatible with all of Telecom’s network
services.
F3188Q88.book Page 113 Friday, April 8, 2005 7:30 PM