Acoustic Research ARS70 Manuel d'utilisation

Important safety instructions, Importantes instructions de securite, Before you begin general controls

Advertising
background image

Caractéristiques
électriques

Adaptateur CA/CC :
Entrée : 100-240 V CA 50/60 Hz 0,6 A
Sortie : 12 V CC, 2 A

Caractéristiques
techniques

Technologie sans fi l Bluetooth

MD

:

Bluetooth v2.1 + EDR, profi l A2DP/

AVRCP

Puissance de sortie audio (10 % THD) :

10 W x 2

© 2012 Audiovox Accessories
Corporation
Une fi liale en propriété exclusive
de VOXX International Corporation
Indianapolis, IN

La marque Bluetooth

MD

et ses logos sont

des marques déposées de Bluetooth SIG,

Inc. et toute utilisation de ces marques

par Audiovox Electronics Corporation

est faite avec son autorisation. Les

autres marques de commerce et noms

commerciaux sont la propriété de leur

propriétaire respectif.

Si cet appareil cause de l’interférence

nuisible à la réception de signaux de

radio ou de télévision, ce qui peut

être validé en fermant et en allumant

l’appareil, l’utilisateur est invité à

corriger cette interférence par une ou

plusieurs des mesures suivantes :

• Réorienter ou déplacer de l’antenne

de réception.

• Augmenter de la distance entre

l’appareil et le récepteur.

• Brancher de l’appareil dans une

prise murale faisant partie d’un

circuit d’alimentation électrique

autre que celui du récepteur.

• Consultez votre revendeur ou

un technicien radio/télévision

compétent pour obtenir de l’aide.

Les changements ou modifi cations non

expressément approuvés par Audiovox

peuvent annuler le droit de l’utilisateur

d’utiliser cet appareil.
Cet appareil ne contrevient pas
aux dispositions de la section 15
du Règlement sur les perturbations
radioélectriques de la Federal
Communications Commission (FCC)
des États-Unis. Son fonctionnement
est assujetti aux deux conditions
suivantes : (1) cet appareil ne cause
pas d’interférence nuisible, et (2) cet
appareil peut capter toute interférence,
y compris une interférence qui pourrait
causer un fonctionnement imprévu.

FCC ID: LMZ-19033BT
IC: 10306A-19033BT

Product registration

Thank you for purchasing an Acoustic Research product. We pride ourselves on the
quality and reliability of all our electronic products but if you ever need service or
have a question, our customer service staff stands ready to help. Contact us at
www.acoustic-research.com. PURCHASE REGISTRATION: Registering On-line will allow
us to contact you in the unlikely event a safety notifi cation is required under the Federal
Consumer Safety Act. Register Online at: WWW.ACOUSTIC-RESEARCH.COM. Click on
Product Registration and Fill Out the Brief Questionnaire.

Enregistrement du produit

Merci d’avoir acheté un produit Acoustic Research. Nous sommes fi ers de la qualité et
de la fi abilité de tous nos produits électroniques, mais en cas de nécessité de réparation
ou pour toute question, le personnel de notre service clientèle est prêt à vous aider.
Contactez-nous sur www.acoustic-research.com. ENREGISTREMENT D’ACHAT: Enregistrer votre produit en ligne nous permettra
de communiquer avec vous pour tout avis de sécurité au sujet du produit en vertu du Federal Consumer Safety Act (Loi fédérale
de protection du consommateur). Enregistrez votre produit en ligne sur: WWW.ACOUSTIC-RESEARCH.COM. Cliquez sur
Enregistrement produit et remplissez le court questionnaire.

Enregisregistro del productotrement du produit

Gracias por comprar un producto Acoustic Research. Nos enorgullece la calidad y fi abilidad de todos nuestros productos
electrónicos, pero si alguna vez necesita servicios técnicos o si tiene alguna pregunta, nuestro personal de atención al cliente está
a su disposición para ayudarle. Comuníquese con nosotros en www.acoustic-research.com. REGISTRO DE COMPRA: El registro en
línea nos permitirá comunicarnos con usted en el caso de tener que enviarle algún aviso de seguridad en virtud de la Ley Federal de
Seguridad del Consumidor. Registre el producto en línea en: WWW.ACOUSTIC-RESEARCH.COM. Haga clic en Registro del
producto y responda al cuestionario.

This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions (1) This device
may not cause harmful interference
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.

FCC ID: LMZ-19033BT
IC: 10306A-19033BT

RF Exposure Warning

This equipment must be installed and
operated in accordance with provided
instructions and the antenna(s) used
for this transmitter must be installed to
provide a separation distance of at least
20 cm from all persons and must not be
co-located or operating in conjunction
with any other antenna or transmitter.
End-users and installers must be provide
with antenna installation instructions
and transmitter operating conditions
for satisfying RF exposure compliance.

Industry Canada
Regulatory Information

This device complies with Industry

Canada license-exempt RSS standard(s).

Operation is subject to the following

two conditions: (1) this device may not

cause interference, and (2) this device

must accept any interference, including

interference that may cause undesired

operation of the device.

The user is cautioned that this device

should be used only as specifi ed within

this manual to meet RF exposure

shall be placed on the apparatus.

• Always leave suffi cient space around

the product for ventilation. Do
not place product in or on a bed,
rug, in a bookcase or cabinet that
may prevent air fl ow through vent
openings.

• Do not place lighted candles,

cigarettes, cigars, etc. on the
product.

• Care should be taken so that objects

do not fall into the product.

• Do not attempt to disassemble

the cabinet. This product does
not contain customer serviceable
components.

• The marking information is located

at the rear panel of apparatus.

• To be completely disconnect the

power input, the AC/DC adaptor
of apparatus shall be disconnected
from the mains.

• AC/DC adaptor is a disconnect

device. The AC/DC adaptor should
not be obstructed OR should be
easily accessed during intended use.

• The ventilation should not be

impeded by covering the ventilation
openings with items such as
newspaper, table-cloths, curtains etc.

• No naked fl ame sources such as

lighted candled should be placed on
the apparatus.

• The use of apparatus in moderate

climates.

• Use only with the

cart, stand, tripod,
bracket, or table
specifi ed by the
manufacturer,
or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.

• Unplug this apparatus during

lightning storms or when unused
for long periods of time.

• Refer all servicing to qualifi ed

service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.

ADDITIONAL SAFETY INFORMATION
• The AC/DC adaptor supplied with

this product is intended to be
correctly oriented in a vertical or
fl oor mount position.

• Do not use unauthorized chargers

or power adapters. Use only
chargers that came with your
product or that is listed in the user’s
guide.

• Apparatus shall not be exposed to

dripping or splashing and no objects
fi lled with liquids, such as vases,

ARS70

v1.0 (1.0.1.0) (EN/F/E)

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near

water.

• Clean only with dry cloth.
• Do not block any ventilation

openings. Install in accordance with
the manufacturer’s instructions.

• Do not install near any heat sources

such as radiators, heat registers,
stoves, or other apparatus (including
amplifi ers) that produce heat.

• Protect the power cord from being

walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.

• Only use attachments/accessories

specifi ed by the manufacturer.

]

Portable Cart Warning

Note: This equipment has been tested
and found to comply with the limits
for a Class B digital device, pursuant
to Part 15 of FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.

However, there is no guarantee
that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an

outlet on a circuit different from
that to which the receiver is
connected.

• Consult the dealer or an

experienced radio/TV technician for
help.

Changes or modifi cations not expressly
approved by Audiovox could void
the user’s authority to operate the
equipment.

Warranty information

Warranty information

Auxiliary source

USB charging

USB charging

Congratulations on purchasing your

ARS70

Bluetooth wireless technology

stereo amplifi ed

audio system

! This

product can provide you hours of
music enjoyment by allowing you to
wirelessly stream audio content from
your mobile device such as a mobile
phone or tablet or computer. No longer
do you need to have your mobile phone
tethered to your audio system. You can
roam around the house or offi ce while
texting, or gaming, or using some other
functions of your mobile phone, while
still listening to the great music played
back through your

ARS70 audio system

.

You can also charge your mobile devices
through the USB port, or even listen to
other portable audio sources such as
mp3 players through the auxiliary line
input.*

* The mobile device must support Bluetooth
version 2.1 + EDR and A2DP (Advanced Audio
Distribution Profi le). Not all mobile devices can
support multitasking such as listening to music
and texting at the same time. Not all mobile
phones will be compatible with the charging
ports.

Content of the box

• Main unit
• AC/DC Adaptor

Plugging in for power

Connect the supplied power adapter to
the

ARS70’s

Power jack, and connect the

other end to a convenient wall outlet.

Top view

– Turn on/off the ARS70

PAIR – Enter Pairing mode

– Start/pause audio playback of your

Bluetooth device

Blue/Red LED – Turns on when

Bluetooth wireless is activated

Green LED – Turns on when AUX IN is

activated

Pairing

Reconnecting

FCC Information

Music playback

Reconnecting

Any Bluetooth device that you wish to
have streaming audio to your

ARS70

must fi rst be PAIRED to the

ARS70

. The

process is simple, and in most cases the
PAIRING process needs to be done only
once.

Pairing your Bluetooth wireless
technology enabled products with
the

ARS70

:

1. Activate the Bluetooth wireless

mode on your Bluetooth device
(smartphone, Laptop, PC) and let
the device enter search mode.

Refer

to the device user manual for more
details.

2

. Press

to turn on the ARS70.

3.

The ARS70 enters the pairing
mode (red and blue LED fl ash
alternatively) automatically at the
fi rst start up. If this is not the fi rst
time you use the ARS70, press and
hold the PAIR button on the ARS70
to enter Pairing mode. The red and
blue LED will fl ash alternately and
an audio signal will be provided to
let you know you can release the
button.

1. To select auxiliary mode, connect

your auxiliary source (e.g. mp3
player) to the AUX input jack at the
back of the

ARS70

with a 3.5mm

audio in cable (not supplied).

2. The green LED will turn on. Control

all other playback operations from
your auxiliary player.

3. To switch back to the Bluetooth

connection, disconnect the 3.5mm
cable from the AUX input jack at
the back of the audio system.

In the previous section you saw how
to make that fi rst connection between
your Bluetooth device and the

ARS70

.

However, since most people don’t leave
their mobile phone at home all the
time, or perhaps the mobile phone is
turned off from time to time, it will be
necessary to reconnect your previously
paired Bluetooth device when you wish
to stream music again. There are a few
different ways in which reconnections
are made, and fortunately they are all
very simple.

Searching mode

When the

ARS70

is in SEARCHING MODE

(which is indicated by

a fl ashing of the

Blue LED

), the

ARS70

is attempting

to automatically connect to the most
recently connected Bluetooth device.
SEARCHING MODE typically occurs when
the

ARS70

is fi rst turned on, or if the

Bluetooth device goes out of the range.

See the Bluetooth range section on
Bluetooth wireless technology range.

Once this most recent device is back
within range, the re-connection should
be automatic. However, it may be
necessary to initiate the audio playback
on the Bluetooth device. Note that the
Searching mode will revert to Bluetooth
Standby Mode (see next section) if no
re-connection is made.

When your Bluetooth device is
connected with the ARS70, the blue LED
lights. Press

to play/pause music on

your device.

Use the USB jack on the back of the
ARS70 to charge your tablet, cell phone
or other mobile device.

Connect your tablet device or cell phone
to the USB jack. Your device should start
charging.

• Some Bluetooth devices

will automatically start
streaming audio when
connected.

• The

ARS70

can store settings

for up to 8 Bluetooth
devices which simplifi es the
connection process for these
devices without the need for
re-pairing every time.

• The term “Bluetooth device”

is used frequently in these
instructions. So what is a
Bluetooth device”? The
answer is simple. This would
be any mobile phone or
mobile tablet or netbook
or computer which has at
least both of the following
capabilities:

a) Is equipped with Bluetooth

wireless technology:
Bluetooth version 2.1 + EDR
and A2DP.

b) Can playback audio content

such as mp3 fi les, etc.

• You can always enter

Pairing mode by pressing
and holding PAIR while
in either SEARCHING MODE or
BLUETOOTH STANDBY MODE.

• If during SEARCHING MODE

(Blue LED is fl ashing)

, you

wish to quickly connect
any other Bluetooth device
(including those previously
paired), simply press/hold the
PAIR button to enter PAIRING
mode, and proceed to PAIR
the Bluetooth device (see
PAIRING section).

• Generally when the user

disables the Bluetooth wireless
connection
on a connected
Bluetooth device the

ARS70

will enter Bluetooth Standby
mode which means that the

ARS70

would be available

for other previously paired
Bluetooth devices to connect
(See Bluetooth Standby
Mode section for more
information). However, in
some cases, the disabling of
Bluetooth wireless connection
on the connected Bluetooth
device may not result in the

ARS70

immediately entering

Bluetooth Standby mode, and
may enter Searching Mode.
(See Searching Mode section
for more information)

12 Month Limited Warranty

Applies to AR Audio Systems

AUDIOVOX ACCESSORIES CORP. (the
Company) warrants to the original retail
purchaser of this product that should
this product or any part thereof, under
normal use and conditions, be proven
defective in material or workmanship
within 12 months from the date of
original purchase, such defect(s) will be
repaired or replaced with reconditioned
product (at the Company’s option)
without charge for parts and repair
labor.

To obtain repair or replacement
within the terms of this Warranty, the
product is to be delivered with proof
of warranty coverage (e.g. dated bill
of sale), specifi cation of defect(s),
transportation prepaid, to the Company
at the address shown below.

This Warranty does not extend to the
elimination of externally generated
static or noise, to correction of
antenna problems, loss/interruptions of
broadcast or internet service, to costs
incurred for installation, removal or
reinstallation of product, to corruptions
caused by computer viruses, spyware or
other malware, to loss of media, fi les,
data or content, or to damage to tapes,
discs, removable memory devices or
cards, speakers, accessories, computers,
computer peripherals, other media

Q: Cannot turn on the

ARS70

when

charging.

A: The

ARS70

will shut down to protect

itself from damage when charging
is overloaded. To resume operation,
disconnect the USB connection and
turn on the

ARS70

again.

Q: Streaming stops and the Power

LED turns off when plugging in
device to the USB jack.

A: The

ARS70

will shut down to protect

itself from damage when charging
is overloaded. To resume operation,
disconnect the USB connection and
turn on the

ARS70

again.

Q: No sound or sound is very low.
A: Make sure the Bluetooth wireless

connection is correct and playback
has been successfully started.

Check

the volume level of your Bluetooth
device

.

Make sure you have disconnected
the 3.5 mm audio in cable from the
AUX input jack.

players, home networks or vehicle
electrical systems.

This Warranty does not apply to any
product or part thereof which, in the
opinion of the Company, has suffered
or been damaged through alteration,
improper installation, mishandling,
misuse, neglect, accident, or by removal
or defacement of the factory serial
number/bar code label(s). THE EXTENT
OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.

This Warranty is in lieu of all other
express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED
TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH
OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR
ANY OTHER WARRANTY. No person or
representative is authorized to assume

for the Company any liability other than
expressed herein in connection with the
sale of this product.

Some states do not allow limitations on
how long an implied warranty lasts or
the exclusion or limitation of incidental
or consequential damage so the above
limitations or exclusions may not apply
to you. This Warranty gives you specifi c
legal rights and you may also have
other rights which vary from state to
state.

Recommendations before returning
your product for a warranty claim:
• Properly pack your unit. Include

any remotes, memory cards, cables,
etc. which were originally provided
with the product. However DO NOT
return any removable batteries,
even if batteries were included
with the original purchase. We
recommend using the original
carton and packing materials. Ship
to the address shown below.

• Note that product will be returned

with factory default settings.
Consumer will be responsible to
restore any personal preference
settings.

Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788

1-800-645-4994

For Canada Customers, please ship to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5

• Charging function may

not be supported for
all phones, tablets or
electronic devices.

• Use the appropriate USB cable

provided with your cell phone
or tablet for charging.

• Charging function is always

enabled as long as the
AC/DC adapter is plugged in
and connected.

The 3.5mm audio direct
connection suspends any
Bluetooth streaming audio
you’re listening to. The
ARS70 plays only the direct connect
audio when you have something
connected to the AUX input jack.

requirements. Use of this device in a

manner inconsistent with this manual

could lead to excessive RF exposure

condition.

Electrical power
information

AC/DC adaptor:

Input: 100-240 V AC 50/60 Hz, 0.6 A
Output: 12 V DC, 2 A

Specifi cation

Bluetooth® wireless technology:

Bluetooth v2.1 + EDR, A2DP / AVRCP

profi le

Audio output power (10%THD) :

10W x 2

©2012 Audiovox Accessories

Corporation

A wholly-owned subsidiary of VOXX

International Corporation Indianapolis,

IN

The Bluetooth® word mark and logos

are registered trademarks owned by

Bluetooth SIG, Inc. and any use of

such marks by Audiovox Electronics

Corporation is under license. Other

trademarks and trade names are those

of their respective owners.

Before you begin

General controls

USB jack that charge your
tablet device or cell phone.

(USB charging cable not included)

Rear view

Connect to the power adapter.

Bluetooth Standby mode

If the most recently connected
Bluetooth device can not be found
during Searching Mode, then the

ARS70

will revert to BLUETOOTH

STANDBY MODE. While in this mode,
the

ARS70

will accept connection

from any previously paired Bluetooth
devices (up to 8 devices). Simply initiate
the connection to the

ARS70

on your

Bluetooth device. See your Bluetooth
device for more information.

Bluetooth range

The Bluetooth wireless technology
generally can operate within a range
of 33 feet or more. However results
may vary based on other factors such
as your Bluetooth device performance,
room layout, wall material, weather
conditions, etc. Also, note that when a
mobile device goes out of range, the

ARS70

will enter Searching mode and

will attempt to automatically reconnect
to the mobile device when that mobile
device comes back into range within

5

minutes

. (See Searching Mode section

for more information)

4. You should be able to see “AR

ARS70

” on the device list in the

Bluetooth settings menu on your
Bluetooth device where you can
complete the pairing operation.
Note in some cases you may be
prompted to enter a passkey. The
passkey is “0000”.

The bluetooth

settings menu or bluetooth device
list will be found in different ways
for diffrent devices depending on
the brand and operating system.

You can manually break the Bluetooth
wireless connection by a press and hold
of the PAIR button.

Q: My paired Bluetooth device can

not reconnect to the

ARS70

.

A: Press and hold PAIR to enter Pairing

mode again. A reconnection may
fail due to :

• The pairing information has been

deleted from your Bluetooth device.

• You may have exceeded the

allowable number of paired devices
for the

ARS70

. Only 8 Bluetooth

devices may have their pairing
credentials stored at one time.
Simply follow the above instructions
for Pairing to have a device paired
again. However remember that the

ARS70

can only store credentials

for 8 devices. Therefore the earliest
paired device will be removed from
that list of 8 to make room for the
device you wish to Pair.

EN/F/E

It is important to read this user manual prior to using your new product for the fi rst time.

Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.
Es importante leer este manual antes de usar por vez primera su equipo.

user manual

guide de l’utilisateur

manual de usuario

USB jack that charge your
tablet device or cell phone.

Troubleshooting tips

LED indicators

Status

Pairing mode


Bluetooth
connection made
Searching mode
(auto-connect to the
most recent
connected device)
Bluetooth Standby
mode (available for
connection from any
previously paired
device)
Power off mode
Aux in connected

Green

LED

Off

Off

Off

Off


Off

On

Blue/Red

LED

Blue and
red fl ash

alternatively
Solid blue

Flashing
blue

Flashing
blue

Off
Off

Connection Indicators:

This Class B digital apparatus

complies with Canadian ICES-003.

Cet appareil numérique de la classe

B est conforme à la norme NMB-003

du Canada.

fi ches, des prises et à la sortie des
appareils.

• N’utilisez que les accessoires

spécifi és par le fabricant.

• N’utilisez qu’avec

le chariot, support,
trépied, crochet
ou table spécifi ée
par le fabricant
ou vendue avec
l’appareil. Lorsque
vous utilisez un
chariot, portez attention lorsque
vous déplacer le chariot et l’appareil
pour éviter les blessures dues au
renversement.

• Débranchez l’appareil pendant les

orages ou si vous ne l’utilisez pas
pendant de longues périodes.

• Confi ez l’entretien à du personnel

compétent. Les réparations sont
nécessaires si l’appareil a été
endommagé de quelque façon
que ce soit, comme un cordon
d’alimentation ou une fi che en
mauvais état, si un liquide a été
renversé sur l’appareil, si des
objets sont tombés sur l’appareil,
si l’appareil a été exposé à l’eau
ou à l’humidité, si l’appareil ne
fonctionne pas normalement ou s’il
est tombé.

INFORMATIONS DE SECURITES
SUPPLEMENTAIRES
• L’adaptateur CA/CC fourni avec cet

appareil est conçu pour être orienté

IMPORTANTES INSTRUCTIONS DE SECURITE

BIEN LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE

Il est possible que certains des articles
ci-dessous ne s’appliquent pas à
votre appareil. Cependant, il faut
prendre certaines précautions quand
on manipule et utilise tout appareil
électronique.
• Lisez ces instructions.
• Conservez ces instructions.
• Portez attention à tous les

avertissements.

• Observez toutes les instructions.
• N’utilisez pas cet appareil près de

l’eau.

• Nettoyez avec un chiffon sec

seulement.

• N’obstruez pas les ouvertures de

ventilation. Exécutez l’installation
selon les instructions du fabricant.

• N’installez pas près d’une source de

chaleur tel que radiateur, grille de
chauffage, poêle ou autres appareils
(incluant les amplifi cateurs) qui
produisent de la chaleur.

• Assurez-vous que personne ne

marche sur le cordon d’alimentation
ou qu’il n’est pas coincé près des

Note: Cet appareil a été testé et

fonctionne à l’intérieur des limites

déterminées pour les appareils

numériques de Classe B, en vertu de

la section 15 des règlements de la

FCC. Ces normes sont conçues pour

fournir une protection raisonnable

contre l’interférence nuisible dans

les installations domestiques. Cet

appareil génère, utilise et peut

émettre de l’énergie sous forme de

fréquences radio et, s’il n’est pas installé

conformément aux instructions, peut

causer de l’interférence nuisible pour

les communications radio. Cependant,

il n’est pas assuré que de l’interférence

ne se produira pas dans une installation

spécifi que.

Félicitations pour l’achat de votre
système audio stéréo amplifi é ARS70
doté de la technologie sans fi l
Bluetooth. Cet appareil peut vous offrir
des heures de plaisir musical en vous
permettant de transmettre en continu
et sans fi l des contenus audio à partir
de votre appareil portatif, tel qu’un
téléphone cellulaire, une tablette ou
un ordinateur. Vous ne serez plus forcés
de brancher votre téléphone cellulaire
à votre chaîne audio. Vous pouvez
vous déplacer dans votre résidence ou
votre bureau en envoyant des messages
textes, en jouant ou en utilisant les
autres fonctions de votre téléphone
cellulaire tout en écoutant votre
musique grâce à votre système audio
ARS70. Vous pouvez aussi recharger
votre appareil portatif par le port USB
et même écouter d’autres sources audio
portatives, comme un lecteur mp3, par
l’entrée de ligne auxiliaire.*

* L’appareil portatif doit supporter la version
2.1 + EDR de Bluetooth et A2DP (profi l de
distribution audio avancée). Certains appareils
portatifs ne supportent pas le fonctionnement
multitâche, comme l’écoute de la musique et
l’envoi de messages textes en même temps.
Certains téléphones cellulaires ne sont pas
compatibles avec les ports de recharge.

Contenu de la boîte

• Appareil principal
• Adaptateur CA/CC

Vue du haut

– Démarrage/fermeture de l’ARS70

PAIR – Passage en mode d’appariement

– Démarrage/pause de la lecture

audio de votre appareil Bluetooth

DEL bleue/rouge – S’allume lorsque la
fonction sans fi l Bluetooth est activée

DEL verte – S’allume lorsque AUX IN
est activée

Appariement

Information FCC

Information FCC

Pour transmettre des contenus audio
en continu par un appareil Bluetooth à
votre ARS70, cet appareil doit d’abord
être APPARIÉ à l’ARS70. La procédure
est simple et, dans la plupart des cas, la
procédure d’APPARIEMENT n’a qu’à être
effectuée une seule fois.

Appariement de vos appareils dotés
de la technologie sans fi l Bluetooth
à l’ARS70 :

1. Activez le mode sans fi l Bluetooth

sur votre appareil doté de Bluetooth
(un téléphone intelligent, un
ordinateur portatif, un ordinateur
de bureau) et laissez l’appareil
passer en mode de recherche.
Consultez le guide de l’utilisateur
de votre appareil pour plus de
renseignements.

2. Appuyez sur

pour démarrer

l’ARS70.

3. L’ARS70 passe en mode

d’appariement (la DEL clignote
en bleu et rouge en alternance)
automatiquement lorsqu’il est
démarré pour la première fois. Si ce
n’est pas la première fois que vous
utilisez l’ARS70, appuyez et gardez
enfoncé le bouton PAIR de l’ARS70
pour passer en mode Appariement.

Avertissement
d’exposition aux RF

Cet appareil doit être installé et
utilisé selon les instructions fournies
et la ou les antennes utilisées par cet
émetteur doivent être installées à
une distance minimale de 20 cm de
toute personne et ne doivent pas être
situées près ou utilisées conjointement
avec tout autre antenne ou émetteur.
Les utilisateurs fi naux et installeurs
doivent recevoir des instructions sur
l’installation de l’antenne et sur les
conditions d’utilisation de l’émetteur
pour répondre aux exigences quant à
l’exposition aux RF.

Renseignements réglementaires
d’Industrie Canada

Cet appareil est conforme aux normes

CNR des appareils exempts de licence

d’Industrie Canada.

Son fonctionnement est assujetti

aux deux conditions suivantes :

(1) cet appareil ne doit pas causer

d’interférence nuisible, et (2) cet

appareil doit accepter toutes les

interférences reçues, incluant les

interférences pouvant causer un

fonctionnement incorrect.

L’utilisateur est averti que cet appareil

ne doit être utilisé que de la manière

décrite dans ce guide pour répondre

aux exigences quant à l’exposition aux

RF. L’utilisation de cet appareil d’une

manière non conforme aux instructions

de ce guide pourrait causer une
exposition excessive aux RF.

Avant de commencer

Commandes générales

Commandes générales

Port USB permettant de recharger
votre tablette ou téléphone
cellulaire. (câble de recharge USB
non fourni)

Vue de l’arrière

Prise pour l’adaptateur
d’alimentation.

La DEL clignote en bleu et rouge
en alternance et un signal audio est
émis pour vous faire savoir que vous
pouvez relâcher le bouton.

4. Vous devriez voir apparaître « AR

ARS70 » dans la liste des appareils
du menu de confi guration Bluetooth
de votre appareil Bluetooth, où vous
pouvez compléter l’appariement.
Dans certains cas, on peut vous
demander un mot de passe. Le mot
de passe est « 0000 ». L’accès au
menu de confi guration Bluetooth ou
à la liste des appareils Bluetooth se
fait de manière différente selon la
marque et le système d’exploitation
de l’appareil.

Vous pouvez manuellement couper
la connexion sans fi l Bluetooth en
appuyant et en gardant enfoncé le
bouton PAIR.

Indicateurs DEL

État

Mode Appariement

Connexion Bluetooth
réussie
Mode Recherche
(connexion automatique
à l’appareil le plus
récemment connecté)
Mode Attente Bluetooth
(disponible pour se
connecter à tout appareil
précédemment apparié)
Mode Fermeture
Connexion Aux In

DEL

verte

Éteinte


Éteinte

Éteinte

Éteinte

Éteinte
Allumée

DEL bleue/

rouge

Clignote-

ment en

bleu et

rouge en

alternance

Continû-

ment bleu

Clignote-
ment en
bleu

Clignote-
ment en
bleu

Éteinte
Éteinte

Indicateurs de connexion :

This Class B digital apparatus

complies with Canadian ICES-003.

Cet appareil numérique de la classe

B est conforme à la norme NMB-003

du Canada.

]

Avertissement pour

transport par chariot

correctement à la verticale ou dans
une position de support sur le
plancher.

• N’utilisez pas de chargeurs ou

d’adaptateurs non autorisés.
N’utilisez que les chargeurs ou
adaptateurs fournis avec cet
appareil ou indiqués dans la liste du
guide de l’utilisateur.

• L’appareil ne doit pas être exposé

à des infi ltrations ou éclaboussures
d’eau et aucun objet rempli de
liquide – tel qu’un vase – ne doit
jamais être placé sur l’appareil.

• Toujours laisser suffi samment

d’espace autour de l’appareil pour
assurer la ventilation. Ne pas placer
l’appareil sur un lit, un tapis ou sur
un étagère ou dans un meuble qui
pourrait bioquer les ouvertures de
ventilation.

• Ne pas placer de chandelles, de

cigarettes, de cigares, etc, sur
l’appareil.

• Prendre garde que des objets ne

tombent pas dans l’appareil.

• Ne pas tenter de démonter

l’appareil. Celui-ci ne contient pas
de composants pouvant être réparés
par l’utilisateur.

• Les renseignements sur les

caractéristiques sont situés à l’arrière
de l’appareil.

• Pour couper complètement

l’alimentation électrique,
l’adaptateur CA/CC doit être
débranché de la prise.

• L’adaptateur CA/CC sert de dispositif

de débranchement. L’adaptateur
CA/CC ne doit pas être obstrué ET
doit demeurer accessible pendant
l’utilisation.

• La ventilation ne doit pas être

limitée en recouvrant les orifi ces de
ventilation avec des objets comme
un journal, une nappe, des rideaux,
etc.

• Aucune source de fl amme nue,

comme une chandelle allumée, ne
doit être déposée sur l’appareil.

• L’appareil doit être utilisé dans des

conditions climatiques normales.

Branchement de
l’alimentation

Branchez l’adaptateur d’alimentation
fourni à la prise d’alimentation de
l’ARS70 et branchez l’autre terminaison
à une prise murale appropriée.

English

Français

Advertising