Specifications – JVC KD-R811 Manuel d'utilisation
Page 44
44
ENGLISH
Specifications
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Front/
Rear:
50 W per channel
Continuous Power Output (RMS):
Front/
Rear:
20 W per channel into 4 Ω, 40 Hz to
20 000 Hz at no more than 1% total
harmonic distortion.
Load Impedance:
4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass:
±12 dB (50 Hz, 100 Hz, 200 Hz)
Q0.7, Q1.0, Q1.4, Q2.0
Middle:
±12 dB (0.5 kHz, 1.0 kHz, 2.0 kHz)
Q0.7, Q1.0, Q1.4, Q2.0
Treble:
±12 dB (5.0 kHz, 10.0 kHz, 15.0 kHz)
Q0.7, Q1.0, Q1.4, Q2.0
Frequency Response:
40 Hz to 20 000 Hz
Signal-to-Noise Ratio:
70 dB
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Subwoofer-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance:
1 kΩ
Other Terminal:
AUX (auxiliary) input jack, USB input terminal, USB
cable, Aerial input, Steering wheel remote input
TUNER SECTION
Frequency Range:
FM:
87.5 MHz to 108.0 MHz
AM:
MW: 522 kHz to 1 620 kHz
LW: 144 kHz to 279 kHz
FM Tuner:
Usable Sensitivity:
9.3 dBf (0.8 μV/75 Ω)
50 dB Quieting
Sensitivity:
16.3 dBf (1.8 μV/75 Ω)
Alternate Channel
Selectivity (400 kHz):
65 dB
Frequency Response:
40 Hz to 15 000 Hz
Stereo Separation:
40 dB
MW Tuner:
Sensitivity:
20 μV
Selectivity:
40 dB
LW Tuner:
Sensitivity:
50 μV
EN38-45_KD-R811_003A_5.indd 44
EN38-45_KD-R811_003A_5.indd 44
1/18/10 2:40:19 PM
1/18/10 2:40:19 PM