JVC KD-R811 Manuel d'utilisation

Page 28

Advertising
background image

28

ENGLISH

Category

Menu item

Selectable setting, [

Initial:

Underlined

]

Color Setup

Ring Color *

2

On

Off

: When a call comes in, the display will flash in blue.
• The display will change to the original color

when the call is answered or the incoming call
stops.

When the unit receives a text message, the

display only illuminate in blue.

: Cancels.

Audio

Fad/Bal *

3,

*

4

Fader/balance

R6 – F6, [ 0 ]

L6 – R6, [ 0 ]

: Fad (fader): Press

5 / ∞ to adjust the front and

rear speaker output balance.

: Bal (balance): Press

4 / ¢ to adjust

the left and right speaker output balance.

Loud
Loudness

Loud 1/2/3

Off

: Boost low and high frequencies to produce a

well-balanced sound at a low volume level.

: Cancels.

Volume Adjust

Level –5 —
Level +5
,
[ Level 0 ]

: Preset the volume adjustment level of each source

(except FM), compared to the FM volume level.
The volume level will automatically increase or
decrease when you change the source.

• Before making an adjustment, select the source

you want to adjust.

• “FIX” appears on the display if “FM” is selected as

the source.

Subwoofer

LPF

Level

Phase

: Turn the control dial to select the cutoff

frequency to the subwoofer.

Off: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies

higher than 55 Hz/85 Hz/120 Hz are cut off.

: Turn the control dial to adjust the subwoofer

output level. Level 00 to Level 08 [ Level 04 ]

: Turn the control dial to select the subwoofer

phase. 0deg (normal) or 180deg (reverse)

HPF
High Pass Filter

Select the cutoff frequency to the front/rear speakers. Set this to
match the LPF settings.
62Hz/95Hz/

135Hz

Off

: Frequencies lower than 62 Hz/95 Hz/135 Hz are

cut off.

: All signals are sent to the front/rear speakers.

*

2

Displayed only when USB Bluetooth adapter, KS-UBT1 is connected.

*

3

If you are using a two-speaker system, set the fader level to <0>.

*

4

This adjustment will not affect the subwoofer output.

EN28-37_KD-R811_003A_f.indd 28

EN28-37_KD-R811_003A_f.indd 28

1/20/10 3:07:35 PM

1/20/10 3:07:35 PM

Advertising