JVC KD-X250BT - Manuel (Page 15)

Making a call from memory
You can store up to 6 contacts in the memory of
this unit for speed dialing.
To store contacts in memory
1 Enter the hands-free menu.
-<RECENT CALL>/
<PHONEBOOK>/
<DIAL NUMBER>
2 Select a call method.
3 Select a contact (name/phone number).
Phone Number
or
Name
(Hold)
“MEMORY PX” flashes. The contact is stored to the
selected number button (1 - 6).
 To erase a contact from preset memory, select
<DIAL NUMBER> in step 2 and store a blank
number.
4 Store in memory.
To make a call from memory
1 Enter the hands-free menu.
 “NO PRESET” appears if there are no contacts
stored in memory.
2 Select and call the contact.
Using voice recognition
You can use the voice recognition features of the
connected phone through this unit.
 “NOT SUPPORT” appears if the connected
phone does not support this feature.
If only one phone is connected,
(Hold)
1 Enter voice recognition mode.
If two phones are connected,
(Hold)
Select the desired phone Enter “phone list”
2 When “VOICE CTRL”#“[Device Name]”
scrolls on the display, speak the name of
the contact you want to call or the voice
command to control the phone functions.
 Supported voice recognition features vary for
each phone. Please refer to the instruction
manual of the connected phone for details.
 This unit also supports the intelligent personal
assistant function of iPhone.
Deleting a contact (name/
phone number)
Only when <P.BOOK SEL> is set to <PB IN UNIT>.
(
' page 16)
1 Enter the hands-free menu.
-<RECENT CALL>/
<PHONEBOOK>
2 Select a call method.
3 Select the contact (name/phone number)
to be deleted.
Phone Number
or
Name
(Hold)
4 Enter “Delete Entries” menu.
DELETE Selected name/phone number
from step 3 is deleted.
DELETE
ALL All names/phone numbers from
selected menu in step 2 are
deleted.
5 Select <DELETE> or <DELETE ALL>.
Bluetooth mobile phone
ENGLISHޓ| 15
2012/12/14ޓ17:11:8 KD-X250BT_E_EN