JVC KD-R721 - Manuel (Page 23)

23 ENGLISH
Menu operations
Menu item Selectable setting, [ Initial: Underlined ]
DEMO ON : Display demonstration will be activated automatically if no operation is done for
about 20
seconds. / OFF : Cancels. (page 4)
CLOCK
CLOCK SET For settings, see page 4.
24H/12H For settings, see page 4.
CLOCK ADJ * 1 AUTO : The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. /
OFF : Cancels.
DIMMER
DIMMER SET AUTO : Changes the display and button illumination between the Day/Night
adjustments in <BRIGHTNESS> setting when you turn off/on the car headlights *
2 . /
ON : Selects the Night adjustments in <BRIGHTNESS> setting for the display and
button illumination. /
OFF : Selects the Day adjustments in <BRIGHTNESS> setting for
the display and button illumination.
BRIGHTNESS DAY [ 25 ] / NIGHT [ 11 ] : Customizes the display and button illumination brightness
level [
00 — 31 ] for day and night.
DISPLAY
SCROLL * 3 ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at
5-second intervals). /
OFF : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the
setting.)
TAG DISPLAY ON : Shows the Tag information while playing MP3/WMA/WAV tracks. / OFF : Cancels.
PRO EQ For settings, see page 22.
AUDIO
FADER * 4, * 5 R06 — F06 [ 00 ] : Adjusts the front and rear speakers output balance.
BALANCE * 5 L06 — R06 [ 00 ] : Adjusts the left and right speakers output balance.
LOUD ON : Boost low and high frequencies to produce a well-balanced sound at a low volume
level. /
OFF : Cancels.
* 1 Takes effect only when CT (clock time) data is received.
* 2 The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this
case, change the setting to any other than <DIMMER AUTO>.
* 3 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 4 If you are using a two-speaker system, set the fader level to <00>.
* 5 This adjustment will not affect the subwoofer output.
1
If no operation is done
for about 60 seconds, the
operation will be canceled.
2 3 Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
MENU.
[Hold]
Continued...
EN02-29_KD-R721BT_003A_f.indd 23 EN02-29_KD-R721BT_003A_f.indd 23 1/13/11 9:47:27 AM 1/13/11 9:47:27 AM