Yamaha RX-V395 - Manuel (Page 20)

18
DISPLAY PANEL
~
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
Ÿ
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
!
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
⁄
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
@
Center channel mode indicators
The name of a selected center channel mode lights up only
when a program which uses Dolby Pro Logic Surround is
selected.
¤
EFFECT OFF indicator
Lights up if neither the digital sound field processor nor the
Dolby Pro Logic Surround decoder is on. In this state, sound
output is 2-channel stereo.
#
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E button
and the preset station number selector buttons.
‹
AUTO indicator
Lights up when this unit is in the automatic tuning mode.
$
TAPE MON indicator
Lights up when the tape deck (or MD recorder, etc.) is selected
as the input source by pressing the TAPE/MD MONITOR
button.
›
DSP program indicators
The name of a selected DSP program lights up when the built-
in digital sound field processor or the Dolby Pro Logic Surround
decoder is on.
PRESET
kHz
MHz
MEMORY AUTO
SLEEP
TAPE MON
STEREO
0 20 l00
ms dB
PRO LOGIC
ENHANCED CONCERT
VIDEO
MONO
MOVIE TV SPORTS
DISCO ROCK CONCERT
CONCERT HALL
NORM
WIDE
PHANTOM
EFFECT OFF
~ Ÿ @ ¤
› $ # ‹
⁄ !