Whirlpool 920 - Manuel (Page 24)

24
Disconnecting the dishwasher
1. Turn hot water off. (This can be done
after the last rinse.)
2. Press the red button on the connector to
release the water pressure.
3. Lift slightly on the hose connector while
pulling down the locking collar. Pull down
on the connector.
4. Empty any remaining water from the
connector by turning the connector
upside down.
5. Unplug power supply cord and return to
storage compartment.
6. Return hoses to storage compartment.
Locking collar
Hose connector
Converting a portable dishwasher
to a built-in
Your WHIRLPOOL ® Portable Dishwasher
can be converted to a built-in (under-
counter) model by using conversion kit
No. 4317856. The kit is available at your
Whirlpool dealer or Whirlpool designated
service company. Instructions are included
with the kit.
CONNECTING A PORTABLE DISHWASHER
8051228 v08 EN (c32) 1/18/99 4:21 PM Page 24