Whirlpool W10198562A Manuel d'utilisation

Page 2

Advertising
background image

INSTALLATION REQUIREMENTS

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.

Tools needed

TABLE OF CONTENTS

PEDESTAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
INSTALLATION REQUIREMENTS
. . . . . . . . . . . . . . . . . . . . . . . .2

Tools and Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Location Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Before Installing Your Pedestal . . . . . . . . . . . . . . . . . . . . . . . .

3

INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .4

Installing the Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

PEDESTAL SAFETY

2

Parts supplied

Remove the parts package from the pedestal drawer. This
package contains 4, #12 x

5

8

" hex head sheet metal screws

and drawer divider.

Utility knife

1

4

" hex-head ratchet or

open-end wrench (leveling
legs)

5

16

" hex-head ratchet or

nut driver (for sheet metal
screws)

1

4

" nutdriver

9

16

" open-end wrench

(for leveling leg locknuts)

Pliers or slip-joint pliers
(for drain and inlet hoses)

Level

Bucket

Location Requirements

NOTE: If dryer and pedestal assembly is located in a garage,
3" (7.6 cm) must be added under pedestal so that dryer is
18" (46 cm) above garage floor.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline,
away from dryer.

Place dryer at least 18 inches (46 cm) above the floor for
a garage installation.

Failure do to so can result in death, explosion, or fire.

Advertising
Ce manuel est liée aux produits suivants: