Whirlpool GLT3614G - Manuel (Page 12)

12
To clean the burners:
1. Pull the burner caps straight up from the
burner base.
2. Clean the burner caps with warm, soapy water
and a sponge. You can also clean the caps with
a mildly abrasive plastic scrubbing pad and pow-
dered cleanser. Do not clean the burner caps in
a dishwasher or self-cleaning oven.
3. If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to
clean the area.
4. If the ports are clogged, clean them with a
straight pin. Do not
enlarge or distort
the port. Do not
use a wooden
toothpick.
If the burner needs
to be adjusted, call a
qualified technician
for service.
6. Turn on the burner to see if it will light. If the
burner does not light after you have cleaned it,
contact an authorized service technician. Do not
service the sealed burner yourself.
5. After cleaning the gas tube opening and ports,
replace the burner
caps. To replace the
burner caps, make
sure the alignment
pins on the burner
base are properly
aligned with the cap.
Sealed surface burners and cooktop
(cont.)
C a r i n g F o r Yo u r C o o k t o p