Whirlpool GLT3614G - Manuel (Page 10)

10
PART CLEANING METHOD SPECIAL INSTRUCTIONS
Surface burners • See “Sealed surface burners and
cooktop” in the “Caring for your
cooktop” section.
Surface burner grates and caps*
• Light to moderate soil • Soap and water
• Non-abrasive plastic scrubbing pad
• Clean as soon as they become
dirty.
• Wash, rinse and dry well.
• Repeat steps of cleaning process
(with items at left) as needed,
until soil is completely removed.
• Rinse thoroughly and dry.
• NOTE: Do not reassemble caps
on burners while wet. Do not
wash caps in dishwasher.
• Non-abrasive plastic scrubbing pad
• Mild abrasive powdered cleanser
and water
• Heavy burned on soils
• Dishwasher (grates only)
Cleaning chart
(cont.)
C a r i n g F o r Yo u r C o o k t o p
Stainless steel surfaces
(some models)
Cleaning Stainless Steel Surfaces
• Do not use steel wool or soap-filled scouring pads
• Rub in the direction of the grain line to avoid
marring surface
• Always wipe dry to avoid water marks
HOW TO USE
• Wipe with damp cloth or sponge, then rinse
with clean water and wipe dry.
• Rub in the direction of the grain lines with a
damp cloth or sponge and cleaner. Rinse
thoroughly. Repeat if necessary.
• Swab or wipe with cloth. Rinse with water and
dry.
CLEANING AGENT
• Liquid detergent and water; all-
purpose cleaner
• Mild-abrasive cleanser or stainless
steel cleaners
• Vinegar
Routine cleaning
and fingerprints
Stubborn stains and
baked-on residue
Hard water spots
• If commercial cleaners are used, follow label
directions. If product contains chlorine
(bleach), rinse thoroughly and dry with a soft,
lint-free cloth. Chlorine is a corrosive sub-
stance.