Cleaning the control knobs – Whirlpool GJ8640XB Manuel d'utilisation

Page 11

Advertising
background image

11

C A R I N G F O R Y O U R C O O K T O P

Cleaning tips

What to use:

Cooktop Polishing Creme included with
your cooktop with paper towel or clean,
damp sponge
– This creme has been
developed especially for cleaning and
protecting your cooktop. When using,
follow instructions on container.

Steps to follow:

1.

Most spills can be wiped off easily using
a paper towel or clean, damp sponge as
soon as the Hot Surface Indicator Light
goes off.

2.

For stubborn spills, rub Cooktop
Polishing Creme into cooked-on soil
using a paper towel. If some soil remains,
leave some creme on the spot(s) and
follow Step 3.

3.

Carefully scrape spots with the razor
scraper.

4.

Finish by polishing entire cooktop with
Cooktop Polishing Creme and a paper
towel.

Razor scraper – Use to remove cooked-
on soil from your ceramic glass cooktop.
To avoid scratches, keep the razor blade
as flat against the cooktop as possible.
Store razor blades out of reach of
children.

Cleaning the control knobs

1.

Make sure all control knobs are turned to
OFF.

2.

Pull the control knobs straight off. Do not
remove seals under knobs. They keep
moisture and soil out of cooktop.

3.

Wash control knobs with sponge and
warm, soapy water. Rinse well and dry
with a soft cloth. Do not soak.

4.

Replace control knobs by pushing them
firmly into place. Make sure all knobs
point to OFF.

NOTE:

When cleaning, never use steel

wool, abrasives, or commercial oven
cleaners, which may damage the finish.

L

O

MED

-L

O

HI

MED-HI

MED

OFF

HO

T

SURF

ACE

Models RC8640XB,
RC8600XB,
RC8646XD,
RC8600XD,
RC8608XD,
GJ8640XB,
GJ8646XD

Models WBC430,
IBC430, WBC441,
and IBC441

Advertising
Ce manuel est liée aux produits suivants: