Tyco DSC Power832 PC5O15 - Manuel (Page 17)

15
5. If the panel has any fire zones, activation will cause the alarm signal to sound in a pulsed mode.
CAUTION: Do not use an open flame or burning materials to test a smoke or heat detector.
Contact your installer for information on safe methods of testing detectors.
6. When testing is complete, call and advise the central station. Should the system fail to function
properly, contact your installer.
NOTE: Some features described above will not be functional unless enabled by your installer.
Please ensure that your installer has advised you which features are functional on your system.
Door Chime Feature
The door chime feature is used, while the panel is disarmed, to provide a tone from the keypad each
time a door or window is opened or closed. The doors and windows which will provide this indication
are programmed by your installer.
To activate the door chime from an LED or LCD5501Z Keypad:
Enter [✱][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad
buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is
disabled. Press [#] to return to the Ready state.
To activate the door chime from an LCD Keypad:
Start with the panel in the disarmed mode, press [ ✱ ] to enter the function list, then scroll to find...
Press [ ✱ ] or [4] to enable or disable the Door Chime feature. Press [#] to return to
the Ready state.
Keypad Options
All Keypads
Keypad Sounder Control
There are 21 different keypad sounder tones available for the Power832 keypads. From an LCD keypad,
enter [
✱ ][6] [Master code], then use the arrow (< >) keys to scroll to the message “Keypad Buzzer
Control.” Press [ ✱ ] to select the option. Use the arrow (< >) keys to scroll to the desired buzzer sound.
Press [#] to exit. This feature can be accessed from an LED keypad by pressing and holding the [ ✱ ] key.
LCD5500 Keypads Only
Language Selection
The displayed language of the keypad can be changed by pressing and holding both of the arrow (< >)
keys simultaneously. This will cause the keypad to enter the Language Selection mode. Scroll to the
desired language and press the [
✱ ] key. This will select the new language and restart the keypad.
The following three options are accessed by entering [ ✱ ] [6] [Master code]. Use the arrow (< >)
keys to scroll to the appropriate message and press [ ✱ ] to select.
Brightness Control
When this option is selected, the keypad will allow you to scroll through 10 different backlighting
levels. Use the arrow (< >) keys to scroll to the desired backlighting level and press the [#] key to exit.
Contrast Control
When this option is selected, the keypad will allow you to scroll through 10 different LCD display contrast
levels. Use the arrow (< >) keys to scroll to the desired contrast level and press the [#] key to exit.
View Event Buffer
The panel will store the last 128 events which occurred on the system. To view the event buffer, select
the “View Event Buffer” prompt from the user functions list. The keypad will display the event number,
partition, time and date of each event. To toggle to the event name, press the [
✱ ] key. Use the arrow (<
Press (*) For<>
Door Chime