Technics WX-H3050 - Manuel (Page 11)

11
■
Communications with
Customers [TALK]
Any store personnel wearing the headset can communicate
bidirectionally with any customer who is at the menu board.
1. Select a proper sound level by pressing the ! or @ but-
ton.
2. You will hear a beep in the headset when a vehicle
arrives at the menu board.
<When the Press-To-Talk (PTT) mode is pre-
set>
1. Hold down the T1 button and speak to the customer.
A short beep is heard in the headset.
2. Release the button. Your voice is not heard by the cus-
tomer.
<When the Talk-Lock mode is preset>
1. Press the T1 button and speak to the customer.
A short beep is heard in the headset.
2. Press the button again. The lock is released, and your
voice is not be heard by the customer.
■
Communications with Other
Store Personnel [PAGE]
Store personnel wearing the headset can communicate with
each other without being heard by customers.
<When the Press-To-Page (PTP) mode is pre-
set>
1. Hold down the P button and speak into the microphone
at a normal level.
2. Release the button. Your voice will not be heard by the
other store personnel.
<When the Page-Lock mode is preset>
1. Press the P button and speak into the microphone at a
normal level.
2. Press the P button again. The lock will be released, and
your voice will not be heard by the other store person-
nel.
Note: A maximum of 4 operators can have a conversation at
the same time.
Press
Hold down
Release
Press
Press again
Hold down
Release
Press again