Toshiba SD-V594SC - Manuel (Page 32)

32
Basic setup (VCR)
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR’s memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE
menu option to the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
Press VCR MENU. Press SET + or – to select
“CH SETUP”, then press ENTER. 1
Press SET + or – to select “TV/CABLE”. 2
CH SETUP
TV
ADD/DELETE
CABLE
+/Ð/ENTER/MENU
AUTO CH MEMORY
MENU
ON
ON
OFF
OFF
TIMER REC SET
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
AUTO REPEAT
TV/CABLE selection Setting channels automatically
Repeat left step 1 and press SET + or – to
select “AUTO CH MEMORY”. 1
Press ENTER.
Auto tuning will begin. The channel dis-
play will count up and when finished,
the screen returns to normal.
2
+0
Note:
You can’t select “CH SETUP” if you set the channel to “L1” or
“L2”.
Press ENTER to select the TV or CABLE
mode.
The arrow indicates the selected mode.
3
Press VCR MENU until the menu screen is
cleared. 4
TV - VHF/UHF channels
CABLE - Cable TV channels
CH SETUP
TV
ADD/DELETE
CABLE
+/Ð/ENTER/MENU
AUTO CH MEMORY
VCR MENU
ENTER
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
〈+/-/ENTER/MENU 〉
DVD/VCR
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light.)
SET +/–
DVD/VCR SELECT
2I40301A-En_p28-33 21/3/06, 9:43 AM 32