Sylvania SRCD873 - Manuel (Page 6)

SONG TITLE/FOLDER NAME SEARCH FUNCTION (BY REMOTE HANDSET)
YOU CAN SEARCH THE TRACK BY THE TITLE/FLODER NAME DURING STOP MODE:-
1. PRESS THE “ FIND “ BUTTON ONCE, THEN PRESS THE “SKIP UP
” (21) (OR SKIP DOWN ) BUTTON
(13), YOU CAN SEARCH THE TITLE OF EACH SONG ONE BY ONE UNDER ALPHABET ORDER ON LCD
DISPLAY, THEN PRESS THE “ PLAY/PAUSE/STOP ” BUTTON (14) TO START THE PLAYBACK OF THE
SELECTED TRACK.
2. PRESS AGAIN “ FIND ” BUTTON, THE FOLDER NAME IS BEING DISPLAYED. THEN PRESS THE “SKIP UP”
BUTTON (21) (OR SKIP DOWN) BUTTON (13) TO SELECT THE DESIRED FOLDER, AND PRESS THE
“ PLAY/PAUSE/STOP ” BUTTON (14) TO START THE PLAYBACK OF ALL TRACKS INSIDE THAT SELECTED
FOLDER.
REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NOFILE “ IS BEING DISPLAYED” ON
LCD DISPLAY (2).
- IF THERE IS NO FOLDER BEING READ INSIDE THE MEDIA, IT WILL SHOW “ ROOT “ ON THE LCD DISPLAY(2).
- THE LCD DISPLAY SUPPORT ENGLISH LANGUAGE ONLY
MP3/WMA TRACK FORMAT REQUIREMENT:-
- MP3 BIT RATE : 32 KBPS~256 KBPS AND WMA BIT RATE : 32 KBPS ~ 320 KBPS
- THE PERFORMANCE OF PLAYING MP3 IS VARIOUS FROM THE QUALITY OF RECORDING AND THE
METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3 IS LONGER THAN
NORMAL DUE TO DIFFERENCE FORMAT.
z
REPEAT/INTRO/RANDOM MODE (BY REMOTE HANDSET)
PRESS THE REPEAT/INTRO/RANDOM BUTTON BEFORE OR DURING PLAYBACK, A SINGLE TRACK, SINGLE
FOLDER (MP3 ONLY) OR ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-
(1) REPEAT 1 (2) REPEAT ALL TRACK (3) REPEAT ONE FOLDER
(6) OFF MODE (5) RANDOM (4) INTRO PLAY
INDICATOR
PLAY MODE ON LCD DISPLAY
REPEAT SINGLE TRACK
REPEAT ALL TRACKS ALL
REPEAT SINGLE FOLDER
INTRO PLAY MODE
INTRO
RANDOM MODE RANDOM
OFF MODE -----------------
z
REPEAT PLAY
YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
z INTRO PLAY
YOU CAN LISTEN THE BEGINNING (10 SECONDS) OF EACH TRACK BY THIS FUNCTION & SAVING YOUR
TIME TO SEARCH THE DESIRE SONG
z RANDOM PLAY
YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
TRACKS PROGRAMMING (BY REMOTE CONTROL)
UP TO 32 TRACKS CAN BE PROGRAMMED FOR MP3/WMA FILE AND PLAY IN ANY ORDER. BEFORE USE, BE
SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:-
1. SET IN USB/SD MODE & SET AT STOP MODE.
2. PRESS THE “PROGRAM” BUTTON, “ PROG “ WILL APPEAR ON LCD DISPLAY (2). MOREOVER, IT WILL
INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP (21) OR DOWN BUTTONS (13).
4. PRESS THE “ PROGRAM ” BUTTON TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “ PLAY/PAUSE/STOP ”
BUTTON (14) TO PLAY IN ASSIGNED ORDER.
7. TO CANCEL THE PROGRAMMED FILE, PRESS “STOP” BUTTON ON REMOTE HANDSET UNTIL “ PROG”
DISAPPEAR ON LCD DISPLAY (2)
E-5