Sylvania SRCD873 - Manuel (Page 5)

z SET THE RADIO BAND SELECTOR (10) AT “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE
FM-STEREO LED INDICATOR (20) WILL LIGHT UP TO SHOW FM STEREO PROGRAM IS RECEIVING.
HINTS FOR BEST RECEPTION:-
- AM : THE RECEIVER HAS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY ROTATE
OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
- FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE
SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY
MEDIA WITH USB CONNECTING PORT OR SD/MMC MEMORY CARD.
1. SET FUNCTION SELECTOR (7) AT USB/SD MODE AND THEN
PRESS SOURCE BUTTON (4) TO SELECT “ USB OR CARD” MODE.
2. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT
GOING INTO COMPLETELY OR INSERT THE MEMORY CARD IN
THE DIRECTION OF THE ARROW AS SHOWN IN THE LABEL ON
THE UNDERSIDE OF THE MEMORY CARD SLOT COVER. INSERT
STRAIGHT WITHOUT BENDING.
z CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD
DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA (USB
THUMB DRIVE / SD/MMC CARD). CHECK TO BE SURE THE
DIRECTION IS CORRECT BEFORE CONNECTION.
3. THE SYSTEM WILL START READING THE STORAGE MEDIA
AUTOMATICALLY AFTER CONNECTING, AND LCD DISPLAY (2)
WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES AND TOTAL
NUMBER OF FOLDER BEING DETECTED.
z
PLAY / PAUSE / STOP MODE
1. PRESS THE “ PLAY/PAUSE/STOP ” BUTTON (14) TO START PLAYBACK, THE FIRST TRACK WILL START
PLAYBACK.
2. TO INTERRUPT, PRESS THE “ PLAY/PAUSE/STOP ” BUTTON (14) ONCE, THE PLAYING TIME WILL BE
FREEZE & FLASHING ON THE LCD DISPLAY (2). PRESS AGAIN TO RESUME NORMAL PLAYBACK.
3. IF PRESS AND HOLD THE “ PLAY / PAUSE STOP “ BUTTON (14) FOR OVER 2 SECONDS DURIGN
PLAYBACK MODE. THE SYSTEM WILL GO TO STOP MODE.
z SKIP/SEARCH MODE (SKIP/SEARCH UP / SKIP/SEARCH DOWN )
1. DURING PLAY OR PAUSE MODE, IF “SKIP UP” BUTTON (21) IS PRESSED. IT WILL GO TO NEXT TRACK
AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF “SKIP DOWN” BUTTON (13) IS PRESSED. IT WILL GO BACK TO THE
BEGINNING OF THE TRACK, ORIGINAL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3. AFTER STEP 2, PRESS “SKIP DOWN” BUTTON (13) AGAIN WILL GO TO THE PREVIOUS TRACK AND
REMAIN THE PLAY OR PAUSE MODE.
4. IF PRESS AND HOLD THE “ SKIP UP/DOWN BUTTON “ (21)/(13) DURING MP3 PLAYABCK, THE PLAYING
TRACK WILL GO FAST FORWARD OR BACKWARD UNTIL THE BUTTON BEING RELEASED.
REMARK : THE SYSTEM WILL BECOME MUTING DURING SEARCH UP/DOWN MODE
z FOLDER UP CONTROL
1. PRESS “ FOLDER UP“ BUTTON (12), THE FOLDER NOT WILL GOES UP
2. PRESS “ SKIP UP
(21) “ OR SKIP DOWN (13) BUTTON, THE TRACK NO. CHANGE.
3. WHEN THE DESIRED TRACK IS BEING SELECTED, PRESS THE “ PLAY/PAUSE/STOP ” BUTTON (14) TO
START PLAYBACK.
REMARK
- THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 AND WMA FORMAT ONLY THOUGH THE
USB PORT OR SD CARD SLOT
- IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3
ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS
NOT A MAUFUNCTION OF THE SYSTEM.
ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
1. PRESS THE “ INFO “ BUTTON DURING PLAYBACK OF MP3/WMA, THE SONG TITLE IS BEING DISPLAYED.
PRESS THE “ INFO ” BUTTON AGAIN TO DISABLE THE FUNCTION.
E-4