RCA TruFlat 32F530T - Manuel (Page 6)

4 Chapter 1 Graphics contained within this publication are for representation only.
Connections & Setup
TV + VCR + DVD Player
1. Connect your TV to your DVD player
A. Connect the audio cables (white and red) to the INPUT2 AUDIO R and L jacks on the back of the
TV and to the Audio Output Jacks on the DVD player.
B. If your DVD player has Component Output Jacks (Y, P
B
, P
R
), connect three video grade cables to
the Y, P
B
, P
R
jacks on the DVD player and to the Y, P
B
, P
R
jacks on the back of the TV. If your DVD
player doesn’t have Y, P
B
, P
R
jacks, go to C.
-OR-
C. If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD
player and the S-VIDEO jack on the back of the TV. If your DVD player doesn’t have an S-Video
jack, go to D.
Note: If you connect an S-Video cable, you must connect the audio cables to the INPUT1 AUDIO R and L jacks on the back
of the TV, not the INPUT2 AUDIO jacks.
-OR-
D. Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the INPUT2
VIDEO jack on the back of the TV.
2. Connect your TV to your VCR
Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR
(sometimes labeled OUT TO TV).
Note: If your VCR has A/V input jacks, you can connect your TV to your VCR using audio/video cables for better quality.
3. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet or antenna to the Input Jack on your VCR
(sometimes labeled IN FROM ANTENNA or IN FROM ANT).
4. Connect the G-LINK cable to the TV
If you haven’t already done so, remove the Demo Pin from the G-LINK jack. Then, connect the
G-LINK cable to the G-LINK jack on the TV. Next step, place one of the wands of the G-LINK cable to
work with your VCR (instructions are on page 7).
Go to page 7
P R P B
R-AUDIO-L VIDEO
Y
CABLE/
ANTENNA
S-VIDEO G-LINK
R L
INPUT2
R-AUDIO-L VIDEO
INPUT1
AUDIO
OUT
TV (back panel)
DVD
S-VIDEO
L R VIDEO
OUT
IN FROM ANT
OUT TO TV
CH3
CH4
VCR
VIDEO
OUT
L R
AUDIO
IN
L R
From Cable
or Antenna
Pb Pr Y
1A
2
1D 3
1B
1C*
* If you connect an S-Video cable, you must
connect the audio cables to the INPUT1 AUDIO
jacks on the back of the TV, not the INPUT2 AUDIO
jacks.
4