RCA TruFlat 32F530T - Manuel (Page 12)

10 Chapter 1 Graphics contained within this publication are for representation only.
Connections & Setup
Step 3: Configuring for a VCR
The next series of screens asks you about your VCR setup.
If you connected a VCR to the TV, you will need to follow the
on-screen instructions to select your brand of VCR and run a
system test so that the one-touch record feature will work
properly.
Notes: If your VCR brand isn’t listed, choose the Not Listed option.
Leave the cable box on to download program listings. Leave your
VCR off to record programs with the Guide Plus+ One-Touch Record
feature.
Step 4: Confirming Your Settings
• Check to make sure all settings are complete and correct.
If all settings are complete, highlight Yes, end setup and
press OK. If your cable box and/or VCR code testing
failed, you should see INCOMPLETE where the cable
box and VCR codes are listed. Once setup is complete,
additional screens appear.
If any settings are incomplete or incorrect, highlight No,
repeat setup process and press OK. Follow the
instructions on the screen.
• You can choose to view a demo of the GUIDE Plus+
features, which may take a few minutes to load. If you
don’t want to see the demo right now, press OK to watch
TV.
Downloading Data
The GUIDE Plus+ system is not available until it completes its
first download of program information. To ensure that your
first download of data is complete, you should leave your TV
off overnight. If you use a cable box, be sure to leave it on.
Downloads occur several times a day. The TV must be turned
off for GUIDE Plus+ system data to download.