RCA 25210 - Manuel (Page 10)

10
Connections & Setup
Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before use.
CAUTION: To reduce the risk of fire or personal injury, use
only the Thomson Inc. approved Nickel-metal Hydride (Ni-
MH) battery model 5-2734, which is compatible with this
unit.
1. Locate battery which is packaged inside a plastic bag and is separate
from the handset.
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery installation, the connector is keyed and can
be inserted only one way.
4. Insert the battery pack.
5. Close the battery compartment by placing the handset back cover
slightly higher than the handset and then sliding the cover down into
position.
BATTERY
BLACK WIRE
RED WIRE
PRESS DOWN FIRMLY