Recoton/Advent Acoustic Research Wireless AW811 - Manuel (Page 4)

3
II. Connecting the Speaker System
I. Powering the Transmitter
Connect the small, round plug from the transmitter AC power adapter (M) to
the transmitter power input jack (I) and plug the other end of the transmitter
AC power adapter (M) into any standard 120V AC wall outlet.
Note: Be sure to use the AC power
adapter rated 12V DC 100 mA.
Note: There is no transmitter ON/OFF
switch. The transmitter is designed to be
left plugged in and powered at all times.
If you will not be using the AW811 for an
extended period of time, you may wish
to unplug the transmitter AC power
adapter.
1. Connect the included “Y” adapter
cable (O) to the 3.5mm mini plug
cable coming out of the
transmitter.
2. Connect the RCA-type left (white)
and right (red) audio plugs on the
”Y” adapter cable to the
corresponding left and right audio
outputs of your A/V receiver, amp
or other audio source.
1. Connect the included “Y” adapter
cable (O) to the 3.5mm mini plug
cable coming out of the
transmitter.
2. Connect the RCA-type left (white)
and right (red) audio plugs on the
“Y” adapter cable to the
corresponding left and right audio
outputs on the TV.
Plug the cable coming out of the
transmitter into the headphone output
of your stereo or the audio output jack
on your computer. Use the included
1 /
4
” headphone adapter (P) to convert
the 3.5mm plug to a 1 /
4
” plug as
needed.
Transmitter
AC Power
Adapter (M)
120V AC
wall outlet
i. Connecting to an A/V Receiver:
iii. Connecting to a Stereo or a Computer:
II. Connecting to an Audio Source:
I
Transmitter
Transmitter
Transmitter
A/V Receiver
Stereo
Audio Input Cable (K)
“Y” adapter cable (O)
1/4” headphone
adapter (P)
Audio Input Cable (K)
“Y” adapter cable (O)
Audio Input Cable (K)
ii. Connecting to a TV:
TV
Audio Output
Audio Output