NEC ACCUSYNC 125F - Manuel (Page 8)

6
Controls
–continued
Size and Position Controls
HORIZ-SIZE: Decreases or increases the horizontal size of the image.
HORIZ-POSITION: Moves the image horizontally (left or right).
VERT-SIZE: Decreases or increases the vertical size of the image.
VERT-POSITION: Moves the image vertically (up or down).
ROTATION: Rotates the entire display clockwise or counterclockwise.
ZOOM: Decreases or increases the size of image.
GTF AUTO ADJUST: Adjusts the size and position of image
automatically.
FACTORY PRESET:
Restores the items in Size and Position Controls to
the factory preset condition.
Geometry Controls
PINCUSHION: Decreases or increases the curvature of the sides either
inword or outword.
PIN-BALANCE:
Decreases or increases the curvature of the sides either
to the left or right.
KEYSTONE:
Decreases or increases the bottom of the screen to be the
same as the top.
KEY-BALANCE:
Decreases or increases the tilt of the sides either to the
left or right.
TOP-PIN:
Decreases or increases the top of corners.
TOP-BALANCE: Moves the slant of top to the left or right.
BOTTOM-PIN: Decreases or increases the bottom of corners.
BOTTOM-BALANCE: Moves the slant of bottom to the left or right.
VERT-LIN: Decreases or increases the spacing on the center of screen
vertically.
VERT-LIN-BALANCE:
Decreases or increases the spacing on the bottom
or top of the screen vertically.
NOTE: VERT-LIN and VERT-LIN-BALANCE allow you to adjust the
spacing of the area on the screen. The purpose of these controls
is to ensure that a one-inch circles is a true circle wherever it is
on the screen. The best way to determine the vertical linearity is
as follow:
• Draw equally spaced horizontal lines using a drawing
application that has a ruler.
FACTORY PRESET: Restores the items in Geometry Controls to the
factory preset condition.
01.12.12, 8:43 6