NEC ACCUSYNC 125F - Manuel (Page 10)

8
Controls
–continued
Tools
DEGAUSS: Eliminates the buildup of stray magnetic fields which alter
the correct scan of the electron beams and affect the purity of the
screen colors, focus and convergence.
When activated, your screen image will jump and waver a bit as the
screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse between
uses of the Degauss Control.
POWER SAVE (IPM System):
ON:
The IPM System works normally and all stages of energy savings
are utilized.
OFF: The Off Mode of the IPM Systems is not used.
NOTE: For standard systems and graphics boards, keep the factory
setting at ON.
CONTROL LOCK: This control completely locks out access to all OSM
controls functions except Brightness and Contrast. When attempting to
activate OSM controls while in the lock out mode, a screen will appear
indicating that OSM controls are locked out. To deactivate the Control
lock, push – control button at Control Lock menu of OSM.
OSD POSITION:
You can choose where you would like the OSM
controls menu to appear on your screen. Selecting OSD Position allows
you to manually adjust the OSM controls menu left, right, up or down.
OSD TURN OFF:
The OSM controls menu will stay on as long as it is in
use. In the OSD Turn Off sub-menu, you can select how long the
monitor waits after the last touch of a button for the OSM controls menu
to disappear. The preset choices are 10, 20, 30, 45, 60 and 120
seconds.
DIAGNOSIS:
Indicates the current mode and frequency setting of the
monitor.
LANGUAGE:
OSM controls menus are available in six languages.
AUTO SAVE: The monitor automatically saves the last settings of the
user controls. You can turn this Auto Save feature off by selecting this
menu and changing the off position.
When the off mode is selected, you will prompted with the option to
save or return to the previous setting once you select a different control.
If the save is not confirmed, the setting will go back to previous setting
when OSM turns off.
ALL RESET:
Restores all items to the factory preset condition.
FACTORY PRESET: Restores the items in Tools to the factory preset
condition.
01.12.12, 8:43 8