NuTone VIDEO DOOR VSM4RK - Manuel (Page 7)

TO HELP REDUCE THIS INTERFERENCE, ALL WIRING CONNECTED BETWEEN THE CAMERA
AND TV/MONITOR MUST BE PLACED AT LEAST 12 INCHES FROM ANY A.C. POWER WIRING.
AVOID RUNNING INTERCOM WIRES PARALLEL TO A.C. POWER WIRING.
IMPORTANT: Never use any camera other than NuTone camera supplied with the VSM4RK or the
Camera and/or Monitor will be damaged. Only ONE NuTone camera can be connected to the
monitor.
Optional Handset Wiring
An individual category 5 or category 6 cable must be connected from the optional to the monitor.
• Maximum cable length: 250 feet.
• Cable type: Category 5 or category 6
IMPORTANT: NuTone cannot be responsible for improper system operation that results from
interference generated by light dimmers, fluorescent lighting fixtures, and similar electrical
products. Such interference must be corrected at the source.
TO HELP REDUCE THIS INTERFERENCE, ALL WIRING CONNECTED BETWEEN THE CAMERA
AND TV/MONITOR MUST BE PLACED AT LEAST 12 INCHES FROM ANY A.C. POWER WIRING.
AVOID RUNNING INTERCOM WIRES PARALLEL TO A.C. POWER WIRING.
IMPORTANT: Never use any handset other than NuTone VSA4S handset or the Handset, Camera
and/or Monitor will be damaged. Only ONE optional NuTone VSA4S handset can be connected
to the monitor.
Wiring and Mounting the Camera
1. The VSC4R recessed camera is designed to mount in the VRC4R
rough-in frame (purchased separately) at the time of framing con-
struction. At the same time the rough-in is installed, the category
5 or category 6 cable should be ran from the camera rough-in
location to the monitor location. Please refer to the instructions
supplied with the VRC4R rough-in and VSC4R camera, for mount-
ing and wiring information.
2. At the VRC4R rough-in location, strip approx 2" of outer protective jacket from the category 5 or category 6 cable.
3. Separate and strip approx. 1/2" of insulation from each of the eight wires in the cable. Twist the
following cables together:
• OR and OR/WH
• GR and GR/WH
• BL and BL/WH
• BR and BR/WH
7