Pioneer FLASH MEMORY MULTIMEDIA AV NAVIGATION RECEIVER AVIC-F90BT - Manuel (Page 7)

— Change the source from radio (AM or
FM) to another source.
— Turn the source off
— Turn off the ignition switch (ACC OFF)
! If [Ant CTRL] mode is set to [Power], the
vehicle
’s antenna can be stowed or turned
off only when the ignition switch is turned
off (ACC OFF).
! Do not connect this lead to the system con-
trol terminal of external power amps.
! Be sure not to use this lead as the power
supply lead for the auto-antenna or anten-
na booster. Such connection could cause
excessive current drain and malfunction.
Notice for the blue/white lead
! When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp
’s system remote control term-
inal (max. 300 mA 12 V DC). The control sig-
nal is output through the blue/white lead,
even if the audio source is switched off.
! Do not connect this lead to the auto-anten-
na relay control terminal or the antenna
booster power control terminal.
! Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.
Parts supplied
The navigation unit Power cord
Connector Extension lead
(for reverse signal)
Extension lead
(for speed signal) GPS antenna
RCA connector Microphone
Connecting the System
En
7
English
Section
03