Connecting the power cord (1), Connecting the system – Pioneer FLASH MEMORY MULTIMEDIA AV NAVIGATION RECEIVER AVIC-F90BT Manuel d'utilisation

Page 10

Advertising
background image

Connecting the power cord (1)

White

White/Black

Gray

Gray/Black

Green

Green/Black

Violet

Violet/Black

Front speaker

Front speaker

Left

Right

Rear speaker or
Subwoofer (4

Ω)

Rear speaker or
Subwoofer (4

Ω)

Violet

Violet/Black

Green

Green/Black

Not used.

Subwoofer (4

Ω)

2

When using a subwoofer of 70 W (2

Ω), be sure to connect with violet and violet/black leads of this

navigation system. Do not connect anything with green and green/black leads.

Yellow
To terminal always supplied with power
regardless of ignition switch position.

Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.

Orange/White
To lighting switch terminal.

Black (ground)
To vehicle (metal) body.

With a 2 speaker system, do not connect anything to
the speaker leads that are not connected to speakers.

When a subwoofer is connected to this navigation
system instead of a rear speaker, change the rear
output setting in the Initial Setting. (Refer to
“Operation Manual”.) The subwoofer output of this
navigation system is monaural.

Note

Connecting the System

En

10

Section

03

Advertising