Panasonic WV-CS954 - Manuel (Page 8)

-8-
■ Downloading (saving) or uploading (recovering)
camera setting information
Camera setting information that can be downloaded to
the system controller etc, includes existing preset
position settings and menu settings. However, the
following items are not included.
• Patrol function (page 32)
• Area title function (page 34)
• Blemish compensation pattern (page 39)
• RS485 settings (page 20)
• Password settings (page 42)
Make sure that the functions listed below are all turned
off before downloading camera preset data to the
system controller etc. or uploading downloaded data to
the camera. Download or upload will not end normally
if it is performed while any of these functions are turned
on.
• Alarm (page 37)
• Preset Alarm (page 37)
• Cleaning (page 35)
• Motion Detector (page 36)
• Auto Mode (page 30)
• Self Return (page 30)
When downloading or uploading preset data, aim the
camera at a wall or similar object so there is as little
movement as possible on the screen.
Uploading of WV-CS954 preset data to other models
(e.g. WV-CS854, WV-CS854A, WV-CS854B and WV-
NS324) may cause an error and failure of the
uploading process.
■ Self-diagnosing Function
If abnormal operation due to external noise or some
other reason continues for more than 30 seconds, the
camera will automatically reset itself and restore
normal operation. Reset operation the same
initialization routine that is performed when the camera
is turned on. If the reset is required too often, it could
mean that the camera is installed in a location where
there is a large amount of external noise. This can
cause malfunction of the camera, so you should
contact a qualified service person or system installer
as soon as possible.