Panasonic DVD-LV57 - Manuel (Page 36)

36
RQT6077
For Your Reference
Recording to MDs and cassettes
You can connect recording equipment either through an amplifier or directly to this unit.
When connecting directly, use the same method used for connecting a 2-channel
amplifier or mini-system (
➡ page 35).
You can record the digital signal directly onto an MD.
≥ Use an optical fiber cable for digital connection. Ensure the following conditions are
met.
≥ 1. There is no copy guard recorded on the disc.
≥ 2. The recording equipment can handle a sampling frequency of 48 kHz.
≥ 3. Settings in “Audio” ( ➡ page 32, “Digital output”) have been set as follows:
≥ 3. PCM Down Conversion: Yes
≥ 3. Dolby Digital: PCM
≥ 3. DTS Digital Surround: Off
Using an optional car adaptor:
Part number DY-DC95
Digital recording
Note
≥ In the interests of the traffic safety, do not perform operations on the unit or view video
software while driving a vehicle.
≥ Do not rest the unit directly on your lap for a long time. It can become hot and cause
burns. Place the unit in a secure position for viewing.
≥ You can enjoy sound through your car’s audio system by connecting a car stereo
cassette adaptor (part number—RP-CC20) to this unit’s headphone jack.
DC IN 9V
To the cigarette
lighter socket
Optional car adaptor
This unit (Left side)
Analog recording
%
DC IN 9 V
You can record to a cassette or MD deck without sound being affected by copy guard if
you use analog connection.
≥ Use a stereo connection cable for analog connection.