Pioneer DV-626D - Manuel (Page 33)

33
Setting Your Speaker System
for Multichannel Audio
Playback
This player player contains a built-in decoder for Dolby
Digital and DTS audio sources as well as 5.1 channel
discrete audio output. Ideally, a 5.1 channel system
contains 6 speakers: 2 front speakers, 2 surround
speakers, a center speaker, and a sub woofer. However,
as this is not always the case, accurately setting
[Speaker Setting] to reflect your speaker setup allows
the player’s built-in decoder to reroute signals to
compensate for absent speakers.
Make adjustments in the [Speaker Setting] setting in the
Setup screen Audio 2 menu.
Notes
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been set by
the player.
• If you have not made connections to the 5.1 CH OUT jacks on
the rear panel of the player, it is not necessary to make any
changes to this setting.
1
Move the cursor control joystick right or left to
select the speaker.
Every time the cursor button is pressed, the
selected speaker changes in the following order.
Speaker Setting
Center
On
Audio2 General Language Video 1
–/+ SETUP
Move
Exit ENTER Select
Speaker
Return
L R
SW
LS RS
• • •
2
Move the cursor control joystick down to the
speaker bar and then move right or left to
select “On” or “Off” corresponding to
whether the selected speaker is present in
your system or not, respectively.
Notes
• To help identify the speakers being selected, the initials of the
speakers in the speaker system representation on the right
side of the screen will appear in blue.
• When “On” is selected for a speaker or pair of speakers, the
icons for those speakers turn yellow in the speaker system
representation on the right side of the screen.
• If “Off” is selected for both [Center Speaker] and [Surround
Speaker], [Sub-woofer] is automatically set to “Off”.
• When the sub woofer is “On”, the low range components of
the center and surround signals will be mixed in the LFE signal
and output from the SUB WOOFER jack.
• When the sub woofer is “Off”, the low range components of
the center and surround signals will be mixed in the L and R
signals and output from the front speakers.
• Speakers in this menu setting can also be turned on and off
using CENTER, SURROUND, and SUB WOOFER on the front
panel. However, these buttons do not work when the GUI
indicator is lit.
3Center 2
3 Surround 2 3 Sub-woofer 2
* 1 When the VIRTUAL DOLBY DIGITAL indicator is lit during playback, PCM output is muted.
* 2 When the Setup screen Audio 1 menu [DTS Out] setting is set to “Off”, DTS digital output is muted.
Speaker Setting
Center
On
Audio2 General Language Video 1
–/+ SETUP
Move
Exit ENTER Select
Speaker
Return
L R
SW
LS RS
ADJUSTING AUDIO AND VIDEO SETTINGS
About source audio output
When the source input mode has been switched between the 5.1 Channel and 2 Channel mode settings using the
[Audio Out] setting in the Setup screen Audio 2 menu or by pressing 5.1 CH MODE on the front panel, audio output
for each source will be as shown on the following table.
AUDIO
CONTENTS
OUTPUT
MODE
AUDIO OUT (2 CH) AUDIO OUT (5.1 CH) DIGITAL OUTPUT (S/PDIF)
L,R Front L,R Center Surround L, R Dolby Digital 3 PCM Dolby Digital Sub Woofer
DVD
Dolby
Digital
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
Front Lch, Rch
5.1 ch MODE Front Lch, Rch Front Lch, Rch Surround Lch Rch LFE MUTE Dolby Digital
2 CH MODE
2 ch DOWNMIX
L ch, R ch
2 ch DOWNMIX
L ch, R ch
*1 L ch, R ch Dolby Digital
CD
DTS
LPCM
Dolby
Digital
Karaoke
2 ch DOWNMIX
L ch, R ch
2 ch DOWNMIX
L ch, R ch
Dolby Digital
L ch, R ch
*2 DTS
*2 DTS
Lch, Rch
Lch, Rch
MUTE
L ch, R ch
*2 DTS
*2 DTS
Lch, Rch
Lch, Rch
5.1 ch/2 ch
MODE
5.1 ch MODE
5.1 ch/2 ch
MODE
5.1 ch MODE
2 CH MODE
5.1 ch/2 ch
MODE
L ch, R ch
Lch, Rch Lch, Rch
Lch, Rch Lch, Rch
L ch, R ch
Video CD
MUTE MUTE MUTE 2 CH MODE
2 ch DOWNMIX
L ch, R ch
2 ch DOWNMIX
L ch, R ch
L ch, R ch Dolby Digital
Center
2 ch DOWNMIX
L ch, R ch
2 ch DOWNMIX
L ch, R ch
Front Lch, Rch Surround Lch Rch LFE Center
MPEG
5.1 ch/2 ch
MODE
L ch, R ch L ch, R ch MUTE MUTE MUTE L ch, R ch MPEG