Pioneer DV-626D - Manuel (Page 28)

28
1
Press STOP 7 (7 on the front panel).
Playback stops.
2
Press OPEN/CLOSE 0 (0 on the front panel).
The disc tray comes out.
3
Remove the disc.
4
Press STANDBY/ON on the front panel (
on the remote control. (U.S. and Canadian
models)
4
Press on the remote control. (Other models)
The disc tray goes back in.
5
Press POWER on the front panel to turn the
player’s power off. (Other models)
Resuming playback from where
you stopped
–– DVD/Video CD
With this player, it is possible to resume play of a DVD
even when play has been stopped.
Press STOP 7 once to enable play to resume
from a point shortly before the DVD was stopped
when PLAY
3 is pressed again.
• To begin disc playback from the beginning, press
STOP 7 twice to turn off resume playback, and then
start playback again.
• When STOP 7 is pressed, “RESUME” appears in the
display for as long as resume playback is possible. If
the function is canceled, “RESUME” disappears and
the disc format appears in the display.
Note
Resume play is only possible when the disc is loaded and
STOP
7 has not be pressed twice in succession (“RESUME”
appears in the display). If you want to continue viewing a DVD at
a later time or date, it is recommended to use the Last Memory
function described on page 56.
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
0
4 ¢ 1 ¡
7 8 3
2 3
4,(5) 1
0
4
¢
1 ¡
7
8
3