Pioneer DV-45A - Manuel (Page 49)

The Audio Settings Menu 06
49
En
Channel Level
• Default setting: Fix / all speakers 10 ft.
This setting allows you to set the level of
each channel sent to the 5.1 channel analog
outputs, and to set the distance of the
speakers from your listening position so that
the player can optimize the surround sound.
1 Press SETUP and select ‘Audio Set-
tings’ from the on-screen display.
Video Adjust Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
2 Highlight Channel Level, then use the
Joystick (left/right) to change to ‘Fix’ or
‘Variable’, as required.
Audio Settings 1/ 2
Audio DRC
Virtual Surround
Channel Level
Off
Off
Fix
• Fix – Channel levels are fixed, but you
can set the speaker distances
• Variable – You can specify variable
channel levels as well as speaker
distances
3 If you chose Variable, move the
joystick down to proceed to the next
screen.
Audio Settings 1/ 3
Audio DRC
Virtual Surround
Channel Level
Off
Off
Variable
4 Variable setting only: Set the channel
levels for each speaker.
Audio Settings 2/ 3
Channel Level L
Channel Level C
Channel Level R
Channel Level RS
Channel Level LS
Channel Level SW
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
• Use the Joystick (up/down) to select a
speaker.
• Use the Joystick (left/right) to adjust the
channel level for that speaker.
Channel levels can be set from –6 dB to
+6 dB. in 0.5 dB increments.
After setting up all the channel levels, move
the Joystick down until you reach the
speaker distance setting screen.