Pioneer DV-45A - Manuel (Page 15)

Connecting Up 02
15
En
Connecting for multichannel
surround sound
You can connect this player to your AV
receiver using the multichannel analog
outputs or one of the digital outputs.
In addition to these connections, you should
also connect the 2 channel analog outputs
for compatibility with all discs.
You’ll probably also want to connect a video
output to your AV receiver. You can use any
of the video outputs available on this player
(the illustration shows a standard (compos-
ite) connection).
Connecting using the
multichannel analog outputs
If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this
player to it using the multichannel analog
outputs. Doing this will ensure that you can
enjoy all kinds of disc, including Dolby
Digital and DTS DVD-Video discs, as well as
high sampling rate and multichannel DVD-
Audio and SACD discs.
1 Connect the MULTICHANNEL AUDIO
outputs on this player to the multi-
channel audio inputs on your AV receiver.
It’s convenient to use three stereo audio
cables; one for the
FRONT, one for the
SURROUND and one for the CENTER and
SUBWOOFER channels.
2 Connect the analog AUDIO OUT L/R
and VIDEO OUTPUT jacks on this player
to a set of analog audio and video inputs
on your AV receiver.
The diagram shows standard video connec-
tions, but you can alternatively use the
S-Video or component video connections if
they’re available.
3 Connect the AV receiver’s video
output to a video input on your TV.