Pioneer DV-PT100 - Manuel (Page 16)

16
You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time if
the Auto Clock process did not set them correctly.
Example: Setting the clock to “8:30 AM”, 30th (SAT)
October, 2004.
1
Press VCR MENU.
Press SET + or – to select the
“SYSTEM SETUP” option, then
press ENTER.
2
Press SET + or – to select the
“CLOCK SET” option, then press
ENTER.
3 Press SET + or – to set the month,
then press ENTER.
4
Set the day, year and time as in
step 3.
After setting the clock, date and time
starts functioning automatically.
NOTES:
• After a power failure or disconnection of the power plug,
the time display will be lost. In this case, set the present
time again if the Auto Clock did not set correctly.
• To move cursor backward, press CANCEL.
1
Press VCR MENU.
Press SET + or – to select the “CH
SETUP” mode, then press ENTER.
This DVD/VCR is equipped with a channel memory
feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the DVD/VCR’s memory. In addition to
normal VHF and UHF channels, this DVD/VCR can
receive up to 113 Cable TV channels. To use this DVD/
VCR with an antenna, set the TV/CABLE menu option to
the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
Tuner setting
TV/CABLE selection
1
Press VCR MENU.
Press SET + or – to select the
“CH SETUP” mode, then press
ENTER.
2
Press SET + or – to select the
“ADD/DELETE” mode, then press
ENTER.
3 Select the desired channel to be
memorized or deleted using SET
+ or – button, or using Number
keys.
4
Press ENTER to select the “ADD” or “DELETE”.
5 Press VCR MENU until the MENU screen is cleared.
To add/delete channels
1
In the “CH SETUP” menu, press
SET + or – to select “AUTO CH
MEMORY”, then press ENTER.
2
The DVD/VCR will begin memoriz-
ing all the channels available in
your area.
4 Press VCR MENU until the MENU screen is cleared.
2 Press SET + or – to select the
TV/CABLE mode.
3
Press ENTER to select the TV or
CABLE mode.
The arrow indicates the selected
mode.
TV - VHF/UHF channels
CABLE - CABLE TV channels
Automatic memory tuning
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
〈+/-/ENTER/MENU〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
〈+/-/ENTER/MENU〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
ON OFF
á+/-/ENTER/CANCEL/MENUñ
MONTH
DAY
YEAR
TIME
10
30 (SAT)
2004
8 : 30 AM
á+/-/ENTER/MENUñ
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
á+/-/ENTER/MENUñ
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
á+/-/ENTER/MENUñ
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
á+/-/ENTER/MENUñ
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
CH 003 ADD
á+/-/0-9/ENTER/MENUñ
Manual clock setting
You can add the channels you want or delete the chan-
nels you do not want manualy.
Noise elimination
When you don't want to receive a weak signal broad-
cast, the Blue back screen can be obtained by selecting
the NO NOISE BACKGROUND “ON”. When the unit is
shipped from the factory, the NO NOISE BACKGROUND
is set to the “ON”.
1 In the “SYSTEM SETUP” menu,
press SET + or – to select “ NO
NOISE BACKGROUND”.
2 Press ENTER to select the “ON”
position.
3 Press VCR MENU until the MENU screen is cleared.
〈+/-/ENTER/MENU〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME ON OFF
VRB1362A_10-17.pm6 7/10/04, 16:07 16